Time Settings - ViewSonic CDP4237-L User Manual

TIME settings

1
Press MENU to access the main menus.
2
Press the Navigation buttons to scroll to
OK.
3
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
- To return to the previous level, press BACK.
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Clock Sets the time feature.
Off/On Time Sets the time to turn on or off the Monitor.
Sleep Timer Sets the length of time until the Monitor to turns off. When you turn the Monitor off and turn
it on again, the Sleep Timer will be set to off.
Power on delay When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic If you do not use the monitor for more than 4 hours, it will be in off mode automatically.
Standby
NOTE
Off/On Time can be saved for up to seven schedules; the Monitor is turned on or off at the preset time in the schedule
list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the current time.
The scheduled power-off function works properly only when the device time is set correctly.
When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time
if the set is turned on, and vice versa if the set is turned off.
"The ""Automatic Standby"" and ""Auto off"" functions may not be available in some countries."
TIME and press
Description
44
TIME
Move
Clock
Off Time
On Time
Sleep Timer
Power On Delay
Auto Off
Automatic Standby
OK