Advertisement
Advertisement
Table of Contents
Related Manuals for Connect CSH-DIYCL-231
Summary of Contents for Connect CSH-DIYCL-231
- Page 1 User Manual AmbiColour Smart Light Curtain CSH-DIYCL-231...
-
Page 2: What's In The Box
WHAT’S IN THE BOX • Smart light curtain • Switch controller • Power adaptor • Pair of clips and hook × 20 • Screw × 40 • Screwdriver • User manual You may also need: • Smartphone or tablet with Bluetooth and connected to 2.4GHz band Wi-Fi network •... -
Page 3: Installation
INSTALLATION ⚠ INDOOR USE ONLY 1. Use the hooks at the top of the Smart Curtain Lights to hang it. NOTE: Do not cut the curtain lights to alter its length. - Page 4 INSTALLATION continued... 2. Connect the power cord of the controller to the power adapter, and twist the cap to secure it. 3. Connect the power adapter to a power source and press the Power button on the controller to turn on the lights.
-
Page 5: Controller Overview
CONTROLLER - OVERVIEW MODE/MUSIC: • Hold down for 3 sec. each to switch between scene, monochrome and music modes. • In music mode, press to switch between 4 music modes. • In scene mode, press to switch between animation modes. •... - Page 6 CONNECT WITH THE APP 1. Get the app 2. Register or login to app...
- Page 7 CONNECT WITH THE APP continued... 3. Recommended app settings 4. Turn on Bluetooth and Wi-Fi on your smartphone. Make sure you are connected to a 2.4GHz Wi-Fi access point. Only 2.4G Wi-Fi networks are supported...
- Page 8 CONNECT WITH THE APP continued... 5. Connecting lights to app If light not flashing, hold down ON/OFF button for 5sec. Connect Smarthome...
- Page 9 CONNECT WITH THE APP continued... 6. Using the light (with app) 7. Remove the light from the app SCROLL DOWN...
- Page 10 INSTALLATION HOW TO ATTACH THE HOOKS 1. Run top of the curtain across the clip. 2. Run the hang part of the curtain through the recess at the bottom 3. Insert the hook. 4. Close the clip. 5. Secure with 2 screws.
-
Page 11: Troubleshooting
TROUBLESHOOTING THE SMART CURTAIN LIGHTS DO NOT APPEAR ON THE APP • If the controller’s light is not blinking rapidly, hold down the power button for 5 seconds until the light flashes rapidly to reset it. • Ensure Bluetooth and Wi-Fi are enabled on your smartphone. - Page 12 TROUBLESHOOTING continued... For instance, “NetworkName_2.4GHz” and “NetworkName_5GHz”. • If you are using Telstra Smart Modem, refer to the following guide to resolve band steering issues: https://www.laserco.com.au/Telstra- NBN-Gen-Smart-Modem-Fix...
-
Page 13: Warnings And Cautions
WARNINGS AND CAUTIONS 1. Keep this product out of reach of infants and young children. Children should only use it under adult supervision. 2. Don’t leave the power cord on the floor to prevent tripping. 3. Avoid using or storing the device in humid places such as bathrooms, as well as in dust or dirt. -
Page 14: Specifications
SPECIFICATIONS Dimensions Curtain lights (WxH): 2x2m Power adaptor AC 100-240V, 50/60Hz Wi-Fi Standard 802.11 b/g/n Wi-Fi Frequency 2.4GHz Bluetooth version... - Page 15 Visit our website www.connectsmarthome.com.au Check us out at...
Need help?
Do you have a question about the CSH-DIYCL-231 and is the answer not in the manual?
Questions and answers