Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Connect CSH-10TRI-255
Summary of Contents for Connect CSH-10TRI-255
- Page 1 User Manual AmbiColour Smart Triangle Lights CSH-10TRI-255...
-
Page 2: What's In The Box
WHAT’S IN THE BOX • Smart triangle lights x 10 • Controller • Connection cables x 9 • Double-sided adhesive sticker x 10 • AC adaptor • User manual What you will need: • Smartphone or tablet with Bluetooth and connected to 2.4GHz band Wi-Fi network •... - Page 3 OVERVIEW Large connector Small connector...
- Page 4 OVERVIEW continued... To enter pairing mode, press and hold the On/Off button for 4 seconds. The lights will flash once. Wait for 2 seconds and lights will start flashing. Click the “On/Off’ button: Control the on/off of the light Click the “M” button: Control the static mode and dynamic mode of the light.
-
Page 5: Installation
1. Peel off one side of the adhesive tape and stick it to the back of a light. 2. Connect the controller to the IN port (with the arrow pointing into it) on the back of the light. Run the cable through a cable management clip along the edge of the light. - Page 6 6. Repeat step 5 for other lights and complete your design. 7. Connect the power adaptor to the controller. 8. Connect the power adapter to a power source and press the Power button on the controller to turn on the lights.
- Page 7 CONNECT WITH THE APP 1. Get the app. 2. Register or login to app.
- Page 8 CONNECT WITH THE APP continued... 3. Recommended app settings. 4. Turn on Bluetooth and Wi-Fi on your smartphone. Make sure you are connected to a 2.4GHz Wi-Fi access point. Only 2.4G Wi-Fi networks are supported...
- Page 9 CONNECT WITH THE APP continued... 5. Connecting lights to app. Press and hold POWER button for 10 seconds to enter pairing mode. Triangle lights will illuminate. Follow the app prompts to pair Triangle lights to phone app. AmbiColour Smart Triangle Lights...
- Page 10 CONNECT WITH THE APP continued... 6. Controlling lights with the app. COLOUR Edit name AmbiColour Smart Triangle Lights All lights synchronization Colourful light ON/OFF Adjust Brightness (1%-100%) Erase DIY Adjust DIY Colour Turn On/ Off a specific light of Adjust or your choice.
- Page 11 CONNECT WITH THE APP continued... PRESET SCENE SCENE 44 Preset Create your scenes own custom available light sequence. MUSIC SCHEDULE ACTUAL POINT Light colours will Create your own If your light has been change with the plan cut during use, you...
- Page 12 CONNECT WITH THE APP continued... 7. Removing light from app. AmbiColour Smart Triangle Lights AmbiColour Smart Triangle Lights SCROLL DOWN...
-
Page 13: Troubleshooting
TROUBLESHOOTING THE SMART TRIANGLE LIGHTS DO NOT APPEAR ON THE APP • If lights are not flashing rapidly, hold down the power button (about 4 seconds) until they flash once. Then wait for 2 seconds until they start flashing rapidly to enter the pairing mode. - Page 14 TROUBLESHOOTING continued... using the same SSID, find the settings that allow you to separate the 2.4GHz and 5GHz bands. Usually, there will be an option to configure each band individually. Change the SSID for one or both bands to make them distinct. For instance, “NetworkName_2.4GHz”...
-
Page 15: Warnings And Cautions
WARNINGS AND CAUTIONS 1. For indoor use only. 2. This light panel is best used on smooth, dry surfaces and should not be applied to uneven or wet surfaces. 3. Ensure the surface is completely dry before applying the light panel. 4. -
Page 16: Specifications
SPECIFICATIONS Power adaptor AC 220-240V, 50/60Hz Wi-Fi Standard 802.11 b/g/n Wi-Fi Frequency 2.4GHz Bluetooth version 5.0 Weight 100g... - Page 17 Visit our website www.connectsmarthome.com.au Check us out at...
Need help?
Do you have a question about the CSH-10TRI-255 and is the answer not in the manual?
Questions and answers