Page 3
The Royal Enfield Continental is our heritage-inspired machine, built for the modern, intrepid traveller. With your new machine, we mark the return of one of Royal Enfield’s most loved classic motorcycles - the Continental. Harking back to a time when all that mattered was that the California sun was out and the surf was up, this motorcycle retains the charm that made it legendary.
Page 5
We would like to emphasize that any repairs to the induction, emission, exhaust and evaporative systems must be performed only by a Royal Enfield Authorized Dealer so that the motorcycle conforms to the United States Environment Protection laws, Federal Motor Vehicle Safety Standards and California Air Resources Board regulation (Applicable only for motorcycles sold within the state of California.)
Page 6
If you believe your motorcycle has a defect which could cause a crash and result in serious injury or loss of life, you should immediately contact the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Royal Enfield North America Limited, 226 N Water St., Milwaukee WI 53202 US.
Starting ..............51 Gear shifting, riding and stopping ......54 Service / Maintenance record ........119 Parking ..............56 Wiring diagram ............120 Tools kit ..............57 * Click to reach directly to your choice of topics Royal Enfield Continental GT 650...
Indicates a potentially hazardous situation. Disregarding this message may result in injury to rider or other persons. CAUTION This message, if disregarded, may result in damage to the motorcycle. NOTE Indicates important and useful messages for better understanding. Royal Enfield Continental GT 650...
Email : Licence No. Valid till : Model Color : Engine No. VIN. No. Tyre make Front : Rear : Tyre Nos. Front : Rear : Battery make Battery No. Sold by Date of sale Royal Enfield Continental GT 650...
Use of other manufacturer’s WARNING parts may affect the performance of your motorcycle and render the motorcycle void of Royal Enfield cautions you against the use of certain warranty. Visit your Royal Enfield Authorised Service nonstandard parts such as aftermarket and custom Centre for details.
Page 11
Bright / light colours operation of your motorcycle. New riders should gain are best for greater visibility in traffic, especially at experience under various conditions while driving at night. Avoid loose, flowing garments and scarves. moderate speeds. Royal Enfield Continental GT 650...
Page 12
/ longevity operation other reproductive harm. Exercise extreme caution of your motorcycle. while handling a battery, wash hands thoroughly whenever a battery is handled. Royal Enfield Continental GT 650...
Page 13
SAFE RIDING TIPS / GUIDELINES WARNING Consult your Royal Enfield Authorised Service Centre regarding any questions or problems that occur in the operation of your motorcycle. Failure to do so may aggravate an initial problem, cause costly repairs and jeopardize your personal safety.
(30.5 meters) before reaching the turning. Be passing other vehicles going in the same direction. close to the center line (unless local rules require Never try to pass another vehicle going in the same otherwise), slow down and then turn carefully. Royal Enfield Continental GT 650...
Page 15
However, vehicles and other objects seen in this seen clearly with reference to your riding posture. type of mirror will look smaller and farther away than when seen in a flat mirror. Royal Enfield Continental GT 650...
ACCESSORIES AND LUGGAGE Royal Enfield offers a range of Genuine Motorcycle Re-check the luggage periodically to ensure it is ■ secured and will not shift while riding. Accessories Accessories that have been fully approved and extensively mounted loosely may affect the riding of the tested alongside the motorcycle.
Page 17
ACCESSORIES AND LUGGAGE WARNING Royal Enfield offers a range of Genuine Motorcycle Accessories that have been fully approved and extensively tested alongside the motorcycle. Royal Enfield cautions you against use of nonstandard parts such as aftermarket and custom made extended front forks which may adversely affect the performance and handling of the motorcycle.
Ignition ........Digital spark ignition Max torque ....52.3 Nm @ 5150 rpm Ignition advanced...... 11.25° BTDC Idle rpm....1200 ± 80 RPM Spark plug........BOSCH UR5CC Starting ....Electric start Spark plug gap......0.7 mm to 0.8 mm Royal Enfield Continental GT 650...
Page 19
Front ....320 mm disc, ABS 1.190:1 Rear ....240 mm disc, ABS 1.040:1 Type Pressure Solo With Pillion 0.962:1 Front 32 psi 32 psi Secondary drive..... Sprockets and chain (5/8 Pitch) Secondary ratio....2.533:1 Rear 36 psi 39 psi Royal Enfield Continental GT 650...
Page 20
CENTURA ST 130/70-18 M/C 63H PIRELLI PHANTOM SPORTS NOTE On tube type rim, fit the tyre with a tube. ■ On tubeless type rim, use tubeless type tyre only. ■ Royal Enfield Continental GT 650...
Page 21
Horn.......... 12 V/2.5 A (Dual tone) * The above values are approximate and the actual Starter motor......12 V, 0.8 kW capacity will vary with each fuel tank. Charger port......USB 2.0 - 5 V 2 A output Royal Enfield Continental GT 650...
Page 22
WEIGHTS Modifications or fitments which are not approved by Kerb weight (90% fuel and oil)....213 kg Royal Enfield, will seriously affect the performance of the vehicle and will render the warranty void. Gross vehicle weight ......... 400 kg...
Use of wrong oil grade will reduce the life of the moving parts and seriously affect performance. * Do not mix DOT 4 or other brake fluids together. NOTE 1. Recommendation subject to change without notice. 2. The above values are approximate and the actual capacity will vary. Royal Enfield Continental GT 650...
KREECO.65USA KREEPMETALUS KREEU0028USA 648cc MANUFACTURER: ROYAL ENFIELD, A UNIT OF EICHER MOTORS LIMITED, INDIA IMPORTER: ROYAL ENFIELD NORTH AMERICA LIMITED (SUBSIDIARY OF EICHER MOTORS LIMITED, INDIA), MILWAUKEE, WI 53202 CAUTION It is illegal to tamper with or alter the VIN number of the motorcycle as it will not only against the law but will render the vehicle registration and warranty void.
Page 25
VENT ENGINE CANISTER CAUTION It is illegal to tamper with or alter the Engine number of the motorcycle as it will not only against the law but will render the vehicle registration and warranty void. Royal Enfield Continental GT 650...
Front wheel* Horn Starter motor Rear brake pedal Rear wheel* 10. License plate illuminator DISCLAIMER * The part displayed above are for reference purpose only. This will vary from the parts chosen using motorcycle configurator. Royal Enfield Continental GT 650...
Page 27
Left trafficator front Fuel tank Left side panel / Battery cover Left trafficator rear Tail lamp Side stand Gear change pedal Spark plug NOTE The center stand is not OE fitment in Continental GT 650 model. Royal Enfield Continental GT 650...
Page 28
Speedometer Ignition key Tachometer Ignition/Engine kill switch Right side mirror Hazard switch 10. Fuel tank cap 11. USB charger port 12. Horn button NOTE The tripper is not OE fitment in Continental GT 650 model. Royal Enfield Continental GT 650...
Key can be removed only if ignition is in OFF or ■ remove the key. steering is locked. Turn the key in the clockwise direction to unlock the ■ steering. Royal Enfield Continental GT 650...
Page 30
Anti splash plate Fill fuel only till the bottom of anti splash plate. ■ Maximum fuel level ■ Over filling may result in gasoline entering the EVAP canister and may damage the evaporative emission system. Royal Enfield Continental GT 650...
Page 31
Methods to activate hazard flasher : start switch until engine Ignition switch ON, slide the hazard control to starts for a maximum of ON position. Hazard will work unless manual 5 seconds. deactivation (OFF). Royal Enfield Continental GT 650...
Page 32
switch is “ON”. All the trafficator lamps will flash simultaneously. High beam Low beam HORN FLASH SWITCH Press the switch for flashing Press the horn button flash. to sound horn. Royal Enfield Continental GT 650...
Page 33
To cancel the turn signal lights, push the switch after it has returned to the center position. Turn key clockwise to ■ unlock the side panel. Pull the side panel along ■ with key to gently remove the side panel. Royal Enfield Continental GT 650...
Page 35
It is illegal Press the select button for more than 3 seconds. to ride the motorcycle after disconnecting the speed Automatically the display will become zero. sensor of the motorcycle. Royal Enfield Continental GT 650...
Page 36
It is recommended to take the motorcycle to a Indicates that the nearest Royal Enfield Authorised Service Centre for a high beam head detailed inspection and correction of EFI system. lamp is “ON”. Royal Enfield Continental GT 650...
Page 37
“OFF” automatically. In case the battery voltage is below 12 volt and the battery is not charging when the engine is started, the battery low voltage indicator will continue to glow in the instrument cluster. Royal Enfield Continental GT 650...
Page 38
This device works based on bluetooth connectivity with navigation search based on RE Mobile app with the support of Google Maps. Royal Enfield Continental GT 650...
Page 39
Tripper unit display may look dull during sun Secondary direction or next to next turn overhead conditions this is normal and due to impact Distance to next turn of direct sunlight on the unit customers to refer during other riding conditions. Royal Enfield Continental GT 650...
Page 40
100 m, if there is no turn the display will be blank in this region. Distance to destination or ETA: Shows the total distance to destination or Estimated Time of Arrival (based on used selection from RE Mobile app). Royal Enfield Continental GT 650...
Page 41
RE logo SW version Helmet Google input in paired mode tripper will show clock Clock a)lf no connection is established b) If connection is established but no navigation input is observed c)Once destination is reached Royal Enfield Continental GT 650...
Page 42
Bluetooth connection can be terminated by end for cleaning or wiping on instrument cluster or user also by closing the mobile application. tripper, as it may result in permanent damage to the same. Royal Enfield Continental GT 650...
Page 43
Disable battery optimisation settings / low battery Calibrate mobile phones frequently for more GPS cut-off setting of smartphone for navigation to accuracy & location accuracy is dependent on. work in low battery mode. Royal Enfield Continental GT 650...
Page 44
RE shall not be liable for any damage to smart phones. Do not use any other device other than mobile phones, only one mobile shall be charged at one point of time. Royal Enfield Continental GT 650...
Page 45
USB charger will function only when engine is in for different make mobile phones depending on running condition. smart phone battery capacity, SOC and smart Use standard approved and high quality USB phone charging circuits. cables for proper functioning. Royal Enfield Continental GT 650...
This will help Please refuel as soon as the low fuel indication starts the rider to control the motorcycle. blinking. Royal Enfield Continental GT 650...
Page 47
It is by Always use the approved front / rear tyres and rear no means a substitute for good riding practices and sprocket by Royal Enfield to ensure correct ABS opera- anticipatory braking. tion. Royal Enfield Continental GT 650...
Page 48
nearest dealership for necessary action. Only use recommended spare parts on the brake sys- tem which have been approved by Royal Enfield. ROLL OVER SENSOR ABS does not reduce braking distance. In certain cir- In the event of motorcycle falling over in either of its...
Page 49
DO NOT apply only the front or rear brake as it ■ In the event of the ABS indicator remaining can lead to inefficient braking. continuously “ON”, please take the motorcycle to a nearest Authorised Royal Enfield Service Centre to inspect the brake system. Royal Enfield Continental GT 650...
Page 50
gine speed is above idle, stop the vehicle immediately and get the engine inspected and corrected through a nearest Authorised Royal Enfield Service Centre. Failure to do so can cause engine damage. TACHOMETER This indicates the engine speed in RPM.
Wheel spokes for proper tightness and damage (It’s applicable for spokes wheel model) Headlamp, tail lamp, brake lamp and indicator lamps for proper functioning. Proper functioning of all the warning lamps in the instrument cluster. Royal Enfield Continental GT 650...
RUNNING IN PERIOD The Royal Enfield Motorcycle as you would be the clutch life. During acceleration / deceleration experiencing is capable of consistent high speeds. disengage the clutch completely, shift the gear and However as with any new motorcycle, a “RUNNING- engage the clutch gradually (Not too slowly).
In case the malfunction ■ switch on right hand side indicator does not turn handle bar to run position. “OFF”, get the motorcycle checked through an Royal Enfield Authorised Service Centre for rectification. Royal Enfield Continental GT 650...
Page 54
10 V. Please get the motorcycle checked through an Royal Enfield Authorised Service Centre NOTE to identify and correct the reason for not starting. In case the engine does not start within 5 seconds, ...
Page 55
/ passerby. Ensure gear in neutral position and the neutral lamp is glowing in the speedometer. To shift into neutral, move the motorcycle back and forth gently, while simultaneously shifting the gear. Royal Enfield Continental GT 650...
1 -- N -- 2 -- 3 -- 4 -- 5 -- 6 Recommended up shift speeds Recommended down shift speeds Gear Change kmph Miles Gear Change kmph Miles 25.7 80.5 40.2 64.4 54.7 48.3 69.2 32.2 83.7 Royal Enfield Continental GT 650...
Page 57
Stop the motorcycle in a safe place, turn “OFF” As soon as the motorcycle reaches a speed of ignition and switch “OFF” engine kill switch. Royal Enfield Continental GT 650...
Do not sit on the motorcycle when it is resting on the side stand. The side Please contact nearest Royal Enfield Authorised stand or frame may become damaged and the Service Centre, in case you wish to assemble a motorcycle may fall over.
Description ‘C’ Spanner Allen key 6mm Allen Key 5mm Allen Key 4mm Extension tube Ring Spanner 24 x 14 Combination Screwdriver 06 x 160 Double End Spanner 10 x 12 Tommy bar Spark plug tool Royal Enfield Continental GT 650...
However, for an complete Spray drive chain with rec- ■ maintenance, we recommend you to get in touch with a ommended chain cleaning Royal Enfield Authorised Service Centre. solvent while simultaneous- ly rotating rear wheel. ■ Ensure the drive chain HAND LEVERS, CENTER AND SIDE STAND PIVOTS has been sufficiently and...
Page 61
If in case of oil level is not in above mentioned condition, then top-up the oil to “MAX” condition and repeat the procedure. Do not overfill above the “MAX” mark as it may affect the clutch function. Royal Enfield Continental GT 650...
Page 62
Check the oil level as per oil level checking Tighten spark plug to torque 10 to 15 Nm by using a procedure given below. spark plug spanner. Royal Enfield Continental GT 650...
Page 63
fluid level is center of the window consider as a minimum level. Rear : Check that the brake fluid reservoir is horizontal and that the fluid level is between the “MAX” level and “MIN” level mark. Royal Enfield Continental GT 650...
Page 64
Ensure brake fluid does hydraulic unit valves. not spill on any part of the motorcycle, in the event of spill please clean the area immediately with a soft cloth to avoid damage. Royal Enfield Continental GT 650...
Page 65
(It’s applicable for It is recommended to use Royal Enfield recommended spokes wheel model) tyre specification in case of replacement of new tyres, Check uniform seating of the tyre beading on ...
Page 66
This in no way will affect the performance of the motorcycle or the braking system. Wear indicator At Royal Enfield, we have robust and rigorous testing and development protocols and adhere Front/Rear : The pads need to be replaced if a brake to global validation standards of quality and pad is worm to the indicator.
Page 67
Take care not to damage the front brake disc or completely. toner ring as it will affect the braking system and Remove axle nut and washer from wheel axle. ABS. Royal Enfield Continental GT 650...
Page 68
/ other road users and may lead portion of axle is fully to loss of life. visible on the left side fork end. Royal Enfield Continental GT 650...
Page 69
Remove support from wheel bottom and gently slide out rear wheel from the swing arm with Push rear wheel fully into the swing arm. rear sprocket, brake disc and spacers. Royal Enfield Continental GT 650...
Page 70
DO NOT pull up the rear brake pedal to lift or raise bracket holes in chain adjusters and the center hole the motorcycle for any reason. in the hub are aligned. Support rear wheel suitably and insert rear Royal Enfield Continental GT 650...
Page 71
Failure to do so will result in poor performance of motorcycle which may lead to an accident causing Check for free and smooth rotation of the rear injury to you / other road users and may lead to loss wheel. of life. Royal Enfield Continental GT 650...
Page 72
Take care not to damage the front brake disc or completely. toner ring as it will affect the braking system and Remove axle nut and washer from wheel axle. ABS. Royal Enfield Continental GT 650...
Page 73
/ other road users and may lead portion of axle is fully to loss of life. visible on the left side fork end. Royal Enfield Continental GT 650...
Page 74
Push rear wheel fully into the swing arm. Remove support from wheel bottom and gently slide out rear wheel from the swing arm with rear sprocket, brake disc and spacers. Royal Enfield Continental GT 650...
Page 75
DO NOT pull up the rear brake pedal to lift or raise in the swing arm brake caliper bracket holes in the motorcycle for any reason. chain adjusters and the center hole in the hub are aligned. Royal Enfield Continental GT 650...
Page 76
/ other road users and may lead to loss Check for free and smooth rotation of the rear of life. wheel. Royal Enfield Continental GT 650...
Page 77
Firmly tighten two lock nuts using two spanners after adjustment is done. Clutch lever to be actuated 3 times before any After the adjustment, check the free play and measurement. confirm for specification. Royal Enfield Continental GT 650...
Page 78
Loosen the lock nut on the adjuster at both end condition. of the swing arm. If any abnormality suspected, reach nearest To reduce the free play, tighten the adjuster nut service centre. on the adjuster evenly. Royal Enfield Continental GT 650...
Page 79
Switch “OFF” the engine and remove ignition key Please ensure the both wheels are aligned correctly, after from the key barrel. adjusting the chain and before tightening the rear wheel spindle nut. Disconnect battery negative (-ve) terminal bolt. Royal Enfield Continental GT 650...
Page 80
(belt) downwards tool box to access and release strap the battery. lock from battery strap bracket. Disconnect battery Loosen and positive (+ve) remove hex terminal from flange head screw battery. from battery strap bracket. Royal Enfield Continental GT 650...
Page 81
(+ve) cable while removing the battery connections. NOTE Remove battery For checking the battery voltage contact Royal Enfield from tray. Authorised Service Centre or battery service centre. Royal Enfield Continental GT 650...
Page 82
flanged head screw Assemble battery into battery strap into tray. bracket. Pull battery strap Place battery (belt) downwards strap bracket into to fix strap lock into battery strap battery tray. bracket. Royal Enfield Continental GT 650...
Page 83
CAUTION Keep the red (+ve) positive terminal and (-ve) negative terminal cables firmly connected to the respective battery terminals. Failure to do so may result in damage to the motorcycle electrical system. Royal Enfield Continental GT 650...
Page 84
Disconnect head lamp should be replaced. coupler. Contact an Royal Enfield Gently loosen and Authorised Dealer/ remove the headlamp Service Centre to rim screws 2 Nos from replace the same. headlamp cowl by using Royal Enfield Continental GT 650...
Page 85
4 nos to assembly. head lamp rim. Tighten and refit the headlamp mounting Tighten and refit the screws both sides to headlamp rim screws 2 headlamp cowl by using Nos to headlamp cowl. screwdriver. Royal Enfield Continental GT 650...
Page 86
Replace the bulb using a soft clean cloth. vehicles passing nearby. Re-assemble the tail light in the reverse order of dismantling process. Royal Enfield Continental GT 650...
Page 87
Remove the bulb and replace the same using a soft and clean cloth. Refit the holder to its proper position. Fix the rubber gasket cover. Assemble the indicator housing cover. Royal Enfield Continental GT 650...
Page 88
Release seat lock by pulling knob and remove the seat. WARNING Electronic Control Unit (ECU) may fail due to loose electrical connections, loose battery terminals, etc. Hence, it is very important to keep all the electrical connections are intact. Royal Enfield Continental GT 650...
Page 89
Spare fuse 1 NOTE Spare fuse 2 Make sure the ignition switch is in OFF position when Spare fuse 3 replacing the bulbs, fuses and electrical parts Royal Enfield Continental GT 650...
Page 90
Remove the air filter cover screws and then take out air filter box cover. Pull out filter element and check for dirt. Clean filter element carefully. Royal Enfield Continental GT 650...
LONG TRIP PRECAUTIONS CHECKS PRIOR TO THE COMMENCEMENT OF ITEMS TO BE CARRIED LONG JOURNEY Tool kit. Service the motorcycle at a Royal Enfield Authorised Trafficator light and fuse. Dealer/Service centre. Accelerator and clutch cable. Ensure sufficient quantity of fuel is always available ...
Do not use any additional tools for this purpose Make the same adjustments on both sides, uneven other than C spanner. adjustment may lead to discomfort to the rider. Royal Enfield Continental GT 650...
Page 93
Laden / Two up / Rider + Pillions / Rider payload (Inc of rider weight, + Pillion + Accessories pillion weight and accessories) * Ensure the preload is set equally on the LH and RH rear suspension. Royal Enfield Continental GT 650...
& exhaust outlets. Do not remove side panels while washing to avoid Do not apply any corrosive solvent on painted water entry. surfaces or rubber parts. Royal Enfield Continental GT 650...
Page 95
Please do bearings, chain, brake cam & swing arm bushes to not use warm water for washing as it may damage be washed in spray mode only (not in jet mode). Royal Enfield Continental GT 650...
Page 96
With lube oil. Polish the painted and plated surfaces using recommended automobile polishing wax. Start the engine and allow to run at an idling speed for a few minutes to warm up engine. Royal Enfield Continental GT 650...
For re-use after storage, it is preferable to get engine oil through spark plug hole. Close the hold the motorcycle prepared through a Royal Enfield and crank engine several times and refit spark plug. Authorised Service Centre to ensure the motorcycle Clean drive chain thoroughly and apply Royal is restored to its peak operating conditions.
We have listed below a few basic checks in case your motorcycle is not functioning. If in case the problem is not rectified after these checks, it is necessary to get the motorcycle checked by a Royal Enfield Authorised Dealer/ Service Centre to rectify the problem and to ensure trouble free performance.
Page 99
If engine RPM raises disproportionately to the Adjust the clutch free play and contact Poor pickup vehicle speed Authorised service center ABS (Anti - lock Braking If the ABS lamp continuously ON Contact Authorised service center System) Royal Enfield Continental GT 650...
While your liquid waste like engine oil, coolant and other cleaning solvents need to be regularly replaced, what happens to them? Make sure they are not dumped in the soil or water bodies. You shall store them in a container and handover to an Govt authorized recycling agent, If any or Royal Enfield Service Centre.
Contact the nearest Royal Enfield Authorised Service Centre for expert advice and to carry out the required maintenance.
Page 102
Rubber hose, Inlet manifold / Adaptor Evaporative emission equipment rubber hoses Fuel filter - External Air filter element Clean / replace more frequently if operated in dusty condition Vent pipe under air filter box Hose - Secondary Air Royal Enfield Continental GT 650...
Page 103
Lubricate every 1000 km or earlier as required Brake pads - Front and rear Disc brake fluid level - Front and rear Rear brake pedal and gear change pedal pivot Brake hose and banjo bolt - Front and rear Royal Enfield Continental GT 650...
Page 104
Lubricate and Adjust every 1000 km / Clean, Lubricate and Adjust Rear wheel drive chain every service or earlier as required Rear wheel cush rubbers Spokes tightness / Wheel rim run out front and rear (It is applicable for spokes wheel model) Royal Enfield Continental GT 650...
Page 105
Rider and pillion foot rest pivot All mounting fasteners in vehicle for tightness I - Inspect (Clean, Adjust, lubricate or replace if necessary) R - Replace C - Clean L - Lubricate A : Adjust Royal Enfield Continental GT 650...
Page 106
Or if the motorcycle is used in a very dusty environment, severe climatic cold and hot conditions, bad roads, stagnant water, rainy season and at full throttle etc., Contact a nearest Royal Enfield Authorised Dealer / Service Centre for expert advice and to carry out the periodical maintenance.
In order to avail warranty benefits by second or subsequent owner the second/subsequent owner should inform the nearest Royal Enfield Service Centre about the purchase of the bike and shall fill in the requisite details in the form as requested by Royal Enfield.
Page 108
Parts damaged due to accidents, collision, abuse etc. g. Irregularities not recognised as affecting the quality or function of the motorcycle such as slight vibration, oil leakage, discoloration of exhaust pipe bend and cat region/silencer/soft or hard shock absorber etc. Royal Enfield Continental GT 650...
Page 109
Oxidization of buffed/painted/powder coated items etc. p. Any damage resulting due to natural disaster i.e earthquake, fire and flood etc. Use only Royal Enfield approved parts and accessories. Use of certain other manufacturer’s performance parts will void your new motorcycle warranty.
EMISSION CONTROL SYSTEM WARRANTY YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board and Royal Enfield Motor Company are pleased to explain the emission control system warranty on your new motorcycle. In California, new motor vehicles must be designed, built and equipped to meet the State’s stringent anti-smog standards.
Page 111
If any emission related part on your motorcycle is defective, the part will be repaired or replaced by Royal Enfield Motor Company. This is your emission control system defects warranty.
Page 112
EMISSION CONTROL SYSTEM WARRANTY You are responsible for presenting your motorcycle to an authorized Royal Enfield dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.
Page 113
EMISSION CONTROL SYSTEM WARRANTY We recommend that you take your motorcycle to an authorized Royal Enfield dealer for repairs under this warranty. The dealer has factory-trained mechanics and genuine Royal Enfield parts. However, in the case of an “emergency” (as defined below), you could have repairs performed at any available service establishment or by the owner, using any replacement part.
Page 114
Royal Enfield components unless the non-Royal Enfield parts cause damage to warranted parts or result in the creation of an emissions non-compliant motorcycle. However, Royal Enfield assumes no liability under this warranty with respect to any parts which are not genuine Royal Enfield Parts, unless Royal Enfield Parts cause damage to non- genuine Royal Enfield Parts.
Page 115
The repair or replacement of “warranted parts” which are scheduled for replacement prior to 30,000 km (18641 mi), once these parts have been replaced at the first replacement interval as part of required maintenance services. Repairs and services performed by anyone other than an authorized Royal Enfield Dealer (except in case of emergency as defined above).
(Applicable only for motorcycles sold within the state of California.) Royal Enfield Motors warrants the first owner and each subsequent owner, that this motorcycle is designed and built so as to conform, at the time of sale, with applicable regulations specified by the U.S. Federal Environmental Protection...
Page 117
Repairs to the noise control system may be performed by any other qualified service outlet or individual and use of parts other than genuine Royal Enfield supplied parts is permissible, only if such agency or individuals and the non genuine parts used, are certified to comply with the U.S. Environmental protection agency standards.
The following warranty applies to the evaporative emission control system. Royal Enfield motors warrants the first owner and each subsequent owner, that this motorcycle is designed and built so as to conform, at the time of sale, with applicable regulations specified by the evaporative emission control system...
Page 119
Royal Enfield parts are warranted by their manufacturer to be equal in quality to Genuine Royal Enfield parts in both performance and durability. The use of non-Royal Enfield replacement parts does not invalidate the existing warranty, if any, on other Royal Enfield components unless the non-Royal Enfield parts cause damage to warranted parts or result in the creation of an emissions non-compliant motorcycle.
15 of the FCC Rules. These requirements, the device must be installed to provide a limits are designed to provide reasonable protection separation distance of at least 20 cm from all persons. Royal Enfield Continental GT 650...
It is recommended that the wiring circuit repair and any other electrical rework should be performed only by an Authorized Royal Enfield Service Centre, failure to adhere this may cause damage to electrical systems and render the warranty of the products as void.
Page 124
Part No. RAM00095/A WWW.ROYALENFIELD.COM Edition: M M a a y y 2023...
Need help?
Do you have a question about the Continental GT 650 Twin 2023 and is the answer not in the manual?
Questions and answers