Sennheiser RS 6 Instructions For Use Manual page 19

WHAT TO DO IF ...
... the volume is up but you
cannot hear anything:
... the sound is distorted:
... the sound is slightly noisy:
... you can hear twittering and
chirping, and the sound is "squeezed":
ACCESSORIES
• BA 150
• L 150
• HDR 6 or HDR 6-9
There is no audio signal available. Check the transmitter
connection. Is the volume at the headphone socket of your
hi-fi system or TV sufficient?
Are you still within the transmitter's range?
Is the receiver on the same frequency as the transmitter?
The headphone accuplug has gone flat, please
recharge it immediately.
You are about to leave the transmitter's maximum range.
Soon transmission will be interrupted completely.
The transmitter's modulation level is too low. Increase
the volume on your hi-fi system (see also page 18).
Two transmitters are interfering!
Choose a different transmission channel.
The following items are available to complement your system:
Rechargeable accuplug as a spare, for use when
the supplied accuplug is being recharged
Charger for recharging additional BA 150
accuplugs (recommended when more than two
headphone receivers are used with one
transmitter)
Additional headphone receivers
19