Meaning Of The Leds And Acoustic Signals; Leds On The Transmitter; Acoustic Signals Of The Receiver - Sennheiser RS 4200 II Instruction Manual

Meaning of the LEDs and acoustic signals

Meaning of the LEDs and acoustic signals

LEDs on the transmitter

LED
Operation indication
Charging control LED of
receiver rechargeable
C
battery
Charging control LED of spare
rechargeable battery
Speech intelligibility
8
button

Acoustic signals of the receiver

Acoustic signal
6 short beeps
2 long beeps
1, 2 or 3 beeps after
having pressed the
4
TUNE button
14 | RS 4200 II
Status
D
lit green
off
lit red
lit green
B
lit yellow
Meaning
No audio signal (trans-
mitter is not activated
or out of range)
Rechargeable battery
is flat
Receiver is tuned to
channel 1, 2 or 3
Meaning
Transmitter is switched on
Transmitter is switched off
Spare rechargeable battery
or rechargeable battery is
being charged
Rechargeable battery is
fully charged
Speech enhancement is
activated
Commentary
Automatic switch-off after
approx. 3 minutes
Automatic switch-off after
approx. 10 minutes
These beeps can be switched off
by pressing the TUNE
for 5 seconds while the receiver
is switched on.
4
button