Putting The System Into Operation; Setting Up The Transmitter; Connecting The Transmitter To The Sound Source - Sennheiser RS 4200 II Instruction Manual

Putting the system into operation

Putting the system into operation

Setting up the transmitter

Choose a suitable place near your sound source (e.g. TV).
Do not place the transmitter close to metal objects such
as shelf bars, reinforced concrete walls, etc. as this can
decrease the transmitter's range.
It is not necessary that the transmitter and stethoset
receiver are in a direct line of sight, so you can move
around freely in the home or outside in the garden. One
transmitter can be used to transmit to several receivers on
the same frequency.

Connecting the transmitter to the sound source

Plug in one end of the connection cable
5
AUDIO socket
Check the connection possibilities of your sound source
(e.g. TV).
A
TV
L
Headphone RCA sockets
socket
on the transmitter.
B C
TV AV
R
SCART socket External
E
to the blue
A D
No socket
microphone
RS 4200 II | 7