Melnor HydroLogic 73100 User Instructions

WATER DAY
NEXT START
WATER
AM
PM
TODAY
SU
ZONE
Advanced Two-Zone Electronic Water Timer
User Instructions
WATER DAY START WATER
CYCLE
NEXT START TIME A B C D
WATER DAY EVERY
DELAY
AM HRS
PM DAY
MIN
TODAY
SU MO TU WE TH FR SA
ZONE MANUAL
RESET
1 2 3 4
RAIN DELAY, HOLD
Zone 1
1
Understanding Zones
This is a two zone timer allowing you to water two different areas from the
■
same faucet.
Each zone can be programmed with up to four different start times.
■
You can use the PLANNING TABLE provided on the back of this sheet to
■
help organize your watering schedule for each zone.
2
Battery Installation & Assembly
Remove the battery holder from the back
■
of the Timer Control Unit. Insert two AA
alkaline batteries (Do not use rechargeable
batteries) as indicated on the battery holder.
Replace the battery holder, making sure that
it is firmly and securely placed in the Timer
Control Unit.
NOTE: Do not use your timer when the air
■
temperature is below 40°F (4.5° C). When
storing your timer, be sure it is in a dry place
and protected from frost.
We recommend replacing batteries when the indicator reaches
Installation of the Timer
Attach the timer to an outside faucet and turn on the water. The water must
■
be left on while the timer is attached to the faucet for your timer to operate.
NOTE: You may choose to program your timer before or after attaching it
■
to the faucet.
3
SET CLOCK: "Set Current Time and Day"
The Water Timer default setting is a 12-hour mode (AM/PM). To ensure
■
correct timing, look for either AM or PM to the left of the time. To switch
between 12-hour (AM/PM) and 24-hour (military time), hold the
for 5 seconds. 12-hour mode shows AM or PM while 24-hour mode does
not. Note: Changing time mode will erase all programs.
Before setting your watering times, you must first set the current time and
■
day of the week. When the batteries are first installed, the arrow in the
screen will point to CLOCK. If it is not in that
position, press the button until the arrow
is pointing to CLOCK.
On your screen, a flashing box will appear
■
around the SU. Simply set the timer to the
current day by pressing the
on the touchpad until the square is on the
correct day. Once the correct day has been
indicated, press the button.
To set the time, press the
■
until the correct time appears on the screen, and then press
Press the button (at the top of the touch pad) to move to WATER DAY.
■
START WATER
CYCLE
TIME A B C D
DAY EVERY
DELAY
OK
HRS
DAY
MIN
MO TU WE TH FR SA
MANUAL
RESET
1 2 3 4
RAIN DELAY, HOLD
73100
English
■
73100_INS_ENG_02
Cursor Button
+/- Buttons
OK
OK Button
Cycle Button
Manual Watering Button
Zone Button
Battery Indicator
Zone 2
WATER DAY
NEXT START
WATER DAY
AM
and buttons
PM
TODAY
SU MO TU
ZONE
RESET
1 2 3 4
RAIN DELAY, HOLD
and buttons
4
WATER DAY: "What days do you want to water?"
Check to be sure that the arrow on the screen is pointing to WATER DAY.
■
With this setting, you can select specific days to water or an interval period
of the day when watering will occur.
To set the watering day, use the
■
week you wish to water. Press the
week is highlighted on the screen. You can
select as many days as you like. The days
selected will have a square around them.
To water at preset intervals, press the
■
button on the buttonpad to navigate past the
days of the week. Press the
to set the time period (EVERY 1 DAY through
EVERY 7 DAY(s) ).
Press the
■
WATER.
Note: You will see Zone 1 highlighted at the bottom of
the screen; program Zone 1 before moving on to Zone 2.
5
START WATER: "What time-of-day do you want to water?"
You can select up to four independant start times (CYCLE A, B, C, D). With
■
the arrow pointing to Start Water on your screen, CYCLE A should be
highlighted, use the
If you want to set another START WATER time, press
■
CYCLE B. Repeat the process above to set the next START WATER time.
You may select up to four START WATER times.
When you have set all desired START WATER times, press
■
the
Hold the
6
HOW LONG: "Set the length of each watering cycle."
With the arrow pointing to HOW LONG, use the
■
the length of each watering cycle. After setting HOW LONG you want to
water during a selected cycle, press
until HOW LONG has been set for each cycle.
HOW LONG can be set for up to 360 minutes (6 hours) for each watering
■
cycle. The Cycle length cannot overlap the next START WATER time.
Note: You can only select Watering Cycles if you have set a start time in
■
Step 5 above.
7
SETTING ANOTHER ZONE: "Keep your plants watered
on separate cycles."
When you have set WATER DAY, START WATER, and HOW LONG for
■
Zone 1, press the
Press
■
When all desired zones are set, press the
■
button
8
AUTO MODE: "Your timer is ready to go."
START WATER
CYCLE
In AUTO Mode, your timer will run the watering program you have entered.
TIME A B C D
■
EVERY
DELAY
The screen display will alternate between showing the current time and the
HRS
■
DAY
next watering cycle of each zone.
MIN
WE TH FR SA
MANUAL
.
and
button when the desired day-of-the-
and buttons
button to move to START
and buttons to select the first watering time.
button to move to HOW LONG.
or buttons to advance settings
more quickly.
button back to WATER DAY.
to select Zone 2, and repeat steps 4-6 above.
buttons to select the day-of-the-
WATER DAY START WATER
CYCLE
NEXT START TIME A B C D
WATER DAY EVERY
DELAY
AM HRS
PM DAY
MIN
TODAY
SU MO TU WE TH FR SA
ZONE
MANUAL
RESET
1 2
RAIN DELAY, HOLD
to move to
WATER DAY START WATER
CYCLE
NEXT START TIME A B C D
WATER DAY EVERY
DELAY
HRS
AM
DAY
PM
TODAY MIN
SU MO TU WE TH FR SA
ZONE MANUAL
RESET
1 2 3 4
RAIN DELAY, HOLD
and buttons to select
to move to the next cycle. Repeat
WATER DAY START WATER
CYCLE
NEXT START TIME A B C D
WATER DAY EVERY
DELAY
AM HRS
PM DAY
TODAY MIN
SU MO TU WE TH FR SA
ZONE MANUAL
RESET
1 2 3 4
RAIN DELAY, HOLD
button to enter AUTO mode.
WATER DAY START WATER
CYCLE
NEXT START TIME
A B C D
WATER DAY EVERY
DELAY
HRS
AM
PM DAY
TODAY MIN
SU MO TU WE TH FR SA
ZONE MANUAL
RESET
1 2
RAIN DELAY, HOLD