Sennheiser MM 100 Instruction Manual page 18

Using the MM 100
Making a call
Redialling the last number
dialled*/Voice dialling*
2 s
Stopping redialling or
voice dialling*
Transferring an active call
from the mobile phone to
the headset*
Transferring an active call
from the headset to the
mobile phone*
2 s
12
If you make a call from your mobile phone, any music playback is paused. An ascending confirmation beep is
heard in the headset.
Dial the number on your mobile phone.
Redialling the last number dialled is only possible with certain mobile phones or Bluetooth devices. Please refer
to the manual of your mobile phone or Bluetooth device.
Press and hold the Next button
Two ascending beeps are heard in the headset.
The last dialled number is redialled.
*This function must be supported by the mobile phone.
The voice dialling function must be supported by your mobile phone or Bluetooth device, supporting HFP respec-
tively, and be activated.
Press and hold the Prev. button
Say the name of the other party that you recorded in the phone.
The mobile phone or Bluetooth device automatically dials the corresponding number. If redialling or voice
dialling is successful, two ascending beeps are heard in the headset.
Start to talk.
If redialling or voice dialling has failed (e.g. because there is no last dialled number stored in the phone, the call
is rejected by the other party or the other party cannot be reached), two descending beeps are heard in the
headset.
To stop dialling during a redialling or voice dialling attempt, press the Play/Pause button
Two descending beeps are is heard in the headset. Then either redialling or voice dialling is ended.
*This function must be supported by the mobile phone.
Refer to the manual of your mobile phone for information on how to transfer the call audio from your mobile
phone to the headset.
*This function must be supported by the mobile phone.
Press and hold either the Next button
A low confirmation beep is heard in the headset. The call audio is transferred to the mobile phone.
*This function must be supported by the mobile phone.
for 2 seconds.
for 2 seconds. Two ascending beeps are heard in the headset.
or the Prev. button for 2 seconds.
.