Using The Mm 100; Wearing The Headset; Listening To Music - Sennheiser MM 100 Instruction Manual

Using the MM 100

MM 100
OK
Keyword
0000
Pairing is not successful
Pairing to other Bluetooth
audio devices
Multi-pairing
5 s
10
When the mobile phone prompts a keyword, enter 4 zeros ("0000").
If pairing was successful, the LED
Some mobile phones require an additional step to connect to the headset. For details, refer to the manual of the
mobile phone.
Once paired, most mobile phones are able to automatically transfer the audio to the headset and, in addition,
show a headset symbol in their display.
If pairing is not successful within 60 seconds, the headset returns into idle mode.
On the mobile phone, start a search for Bluetooth devices (see the manual of your mobile phone) and follow
any instructions displayed on the mobile phone display.
If you wish to pair the headset to other Bluetooth devices such as portable music players or laptops, please refer
to the manual of the Bluetooth audio device.
The MM 100 can simultaneously be paired to up to 2 devices, one supporting the HF/HS profile and one
supporting the A2DP, e.g. a mobile phone and a MP3 player.
Pair the MM 100 to one of the devices (see "Pairing the headset" on page 9). If the MM 100 is only paired as
either an HFP/HSP or an A2DP device, you can pair it to a secondary Bluetooth device.
When the headset is in standby mode (i.e. no active call and no music streaming), press and hold the Next
button or Prev. button
The LED flashes alternatingly in red and blue, indicating that the headset is in pairing mode and ready to
pair the secondary device.
Follow the steps described under "Pairing to a mobile phone" on page 9, or the steps described in the manual
of any other device.
Using the MM 100

Wearing the headset

CAUTION! Danger of accidents!
The headset can draw off your attention.
Do not wear the headset in an environment that requires your special attention (e.g. in traffic
or when performing skilled jobs)!
Put on the headset as shown in the drawing.

Listening to music

CAUTION! Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to permanent hearing defects. Please
protect your hearing. Sennheiser headsets also sound exceptionally good at low volumes.
Set the volume to a medium level.
If your Bluetooth device supports the audio/video remote control profile (AVRCP), you can operate the audio
player via a remote control.
flashes slowly in blue.
for 5 seconds.