2. Layout and items supplied Danger! When using the equipment, a few safety pre- cautions must be observed to avoid injuries and 2.1 Layout (Fig. 1) damage. Please read the complete operating 1. Torque selector instructions and safety regulations with due care. 2.
3. Proper use Hammer drilling in concrete Vibration emission value a = 12.76 m/s h, ID Uncertainty K = 1.5 m/s The cordless impact drill/driver is designed for tightening and undoing screws, for drilling in The stated vibration emission levels and stated wood, metal and plastic, and for impact drilling in noise emission values were measured in ac- stone, in each case when using the appropriate...
5. Before starting the equipment When shipping or disposing of batteries and cordless tools, always ensure that they are packed individually in plastic bags to prevent Be sure to read the following information before short circuits and fi res. you use your cordless screwdriver for the fi rst time: To ensure that the LI battery pack provides 1.
6.4 Forward/Reverse switch (Fig. 5 / Item 3) 6.9 Changing the tool (Fig. 7) With the slide switch above the On/Off switch you Important. Set the changeover switch (3) to its can select the direction of rotation of the battery- centre position whenever you carry out any work powered drill/screwdriver and secure it against (for example changing the tool, maintenance...
The reprinting or reproduction by any other me- ans, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the Einhell Germany Subject to technical changes. - 16 - Anl_TP_CD_18_50_Li_i_BL_SPK7_THA.indb 16 Anl_TP_CD_18_50_Li_i_BL_SPK7_THA.indb 16...
10. Charger indicator Indicator status Explanations and actions Red LED Green LED Off Flashing Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger Off Charging The charger is charging the battery pack in quick charge mode. The char- ging times are shown directly on the charger.
* Not necessarily included in the scope of delivery! Please register the product warranty of Einhell brand products. Customers must scan the QR Code of the Serial number in the product or QR code on the box, to additional 6 months warranty for the whole battery and battery charger (Note: Promotion is change without prior notice.
Need help?
Do you have a question about the TP-CD 18/50 Li-i BL and is the answer not in the manual?
Questions and answers