Table of Contents Model BL-BR-0004 / Model BL-BR-0006 Model BL-BR-0008 / Model BL-BR-0010 Section Page General Information ---------------------------------------------------------------------------------- 3 - 4 Safety and Warranty --------------------------------------------------------------------------------- 4 - 8 Technical Specifications --------------------------------------------------------------------------------- 9 Installation -------------------------------------------------------------------------------------------- 9 - 10 Operation -------------------------------------------------------------------------------------------------- 10...
If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 5
Safety and Warranty • When the equipment is in operation the operator shall supervise it, principally when children might be near. • Unplug the equipment when: It is not in use, before to clean it, before to remove or to place some accessory.
Page 6
Safety and Warranty IMPORTANT In case of emergency, unplug the appliance from wall electrical outlet immediately. IMPORTANT Never wash the appliance with direct intense water jets. GENERAL SAFETY PRACTICES The following safety instructions are addressed to both the operator of the machine as well as the person in charge of maintenance.
Page 7
Safety and Warranty understood. If you have any questions, check with Omcan. CAUTION An electric cable or electric wire with damaged jacket or bad insulation could cause electrical shocks as well as electrical leak. Before using the equipment, check conditions of all wires and cables.
Page 8
1 YEAR PARTS AND LABOUR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.
Technical Specifications Model BL-BR-0004 BL-BR-0006 BL-BR-0008 BL-BR-0010 Maximum Volume 4 L / 1.1 Gal 6 L / 1.6 Gal 8 L / 2.1 Gal 10 L / 2.6 Gal 3,500 RPM Rotation 3,000 RPM 3,500 RPM Electrical 110-120V / 60Hz / 1 Power 0.5 HP...
Installation PLACING THE LID The cup lid was developed with non-toxic rubber and provides efficient sealing during process. Observe if the lid is correctly positioned on the cup brim. UPPER LID POSITIONING The upper lid can be used to check the food processing and also to add products to be processed. To remove the upper lid you should rotate it to clockwise until it is lose, pulling it up.
Maintenance CLEANING AND SANITIZATION DISASSEMBLY • Remove the complete cup No. 02 (Picture 01) from the flange motor No. 04 (Picture 01). • Remove the cup lid No. 01 (Picture 01) and the upper lid No. 10 (Picture 01). ASSEMBLY •...
Maintenance IMPORTANT Acid solutions, salty solutions, disinfectants and some sterilizing solutions (hypochlorites, tetravalent ammonia salts, iodine compounds, nitric acid and others), must be AVOIDED, once it cannot remain for long in contact with the stainless steel. These substances attack the stainless steel due to the CHLORINE on its composition, causing corrosion spots (pitting).
Page 16
Special Cup Flange (Black) for 48003 57097.4 AP609 Center Bearing for 48003 69833.6 for 48003 Lid 04 (FE006-107) Black UL (Mold) for 27720 Omcan Logo (Machines) for 48003 27154.3 AP045 PCA M3 Din 985 Inox for 48003 58805.9 AP610 69894.1 48003 Mini Cont.CWC09-01-30D13 110V 50/60Hz...
Page 18
AP593 Central Axis Emborrac for 48004 57060.5 AP011 69826.8 for 48004 48004 Lid 06 (FE006-108) Black UL (Mold) for 27720 Omcan Logo (Machines) for 48004 27154.3 AP594 Special Cup Flange (Black) for 48004 57097.4 AP620 69894.2 48004 AE676 Ring 28x1.2 Din 472 Fosf. for 48004 29966.9...
Page 20
AP593 Central Axis Emborrac for 48005 57060.5 AP011 69826.8 for 48005 48005 Lid 08 (FE006-109) Black UL (Mold) for 27720 Omcan Logo (Machines) for 48005 27154.3 AP594 Special Cup Flange (Black) for 48005 57097.4 AP635 69894.3 48005 AE676 Ring 28x1.2 Din 472 Fosf. for 48005 29966.9...
Page 22
AP593 Central Axis Emborrac for 48006 57060.5 AP011 69826.8 for 48006 48006 Lid 10 (FE006-110) Black UL (Mold) for 27720 Omcan Logo (Machines) for 48006 27154.3 AP594 Special Cup Flange (Black) for 48006 57097.4 AP639 69894.4 48006 AE676 Ring 28x1.2 Din 472 Fosf. for 48006 29966.9...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 28
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the BL-BR-0004 and is the answer not in the manual?
Questions and answers