Cameo ZENIT W600 SMD User Manual

Cameo ZENIT W600 SMD User Manual

Professional outdoor washlight
Hide thumbs Also See for ZENIT W600 SMD:

Advertisement

Quick Links

USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
RGBW
ZENIT
W600 SMD
®
PROFESSIONAL OUTDOOR WASHLIGHT
CLZW600SMD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZENIT W600 SMD and is the answer not in the manual?

Questions and answers

Summary of Contents for Cameo ZENIT W600 SMD

  • Page 1 USER´S MANUAL BEDIENUNGSANLEITUNG MANUEL D´UTILISATION MANUAL DE USUARIO INSTRUKCJA OBSŁUGI MANUALE D´USO RGBW ZENIT W600 SMD ® PROFESSIONAL OUTDOOR WASHLIGHT CLZW600SMD...
  • Page 2: Table Of Contents

    CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO ENGLISH INFORMATION ON THIS USER MANUAL APPROPRIATE USE DEFINITIONS AND SYMBOL EXPLANATIONS SAFETY INSTRUCTIONS NOTES ON PORTABLE OUTDOOR DEVICES INCLUDED INTRODUCTION CONNECTIONS, OPERATING AND DISPLAY ELEMENTS OPERATION SETUP AND INSTALLATION CARE, MAINTENANCE AND REPAIR OPTIONAL ACCESSORIES DMX TECHNOLOGY...
  • Page 3 CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO POLSKI INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI OBSŁUGI UŻYTKOWANIE ZGODNE Z PRZEZNACZENIEM OBJAŚNIENIA TERMINÓW I SYMBOLI ZASADY BEZPIECZEŃSTWA UWAGI DOTYCZĄCE PRZENOŚNEGO SPRZĘTU ZEWNĘTRZNEGO ZAKRES DOSTAWY WPROWADZENIE PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI OBSŁUGA USTAWIANIE I MONTAŻ...
  • Page 4: English

    This device has been developed and manufactured to the highest quality standards to ensure many years of problem-free operation. Please read this manual carefully to be able to use your new Cameo product quickly and optimally. Further information about Cameo Light is available on our website CAMEOLIGHT.com.
  • Page 5: Safety Instructions

    This symbol identifies hazards that can cause electric shock. This symbol identifies danger points or hazardous situations. This symbol indicates hazards caused by hot surfaces. This symbol indicates hazards caused by intense light sources. This symbol indicates a device in which there are no user-replaceable parts. This symbol indicates additional information relating to use of the product.
  • Page 6 CAUTION: 1. Do not put the device into operation immediately if it has been exposed to extreme temperature fluctuations (for example, after transportation). Moisture and condensation can damage the device. Do not switch on the device until it has reached room temperature. 2.
  • Page 7 CAUTION: 1. Moving components such as mounting brackets may become jammed. 2. In the case of devices with motor-driven components, there is a risk of injury due to the movement of the device. Sudden movement of the device can cause shock reactions.
  • Page 8 4. A permanently installed lamp is installed in this lighting unit which must not be replaced by the user. In the event of a fault, please contact your sales partner. SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or audio radio systems): The quality and performance of wireless signal transmissions generally depends on the ambient conditions.
  • Page 9: Notes On Portable Outdoor Devices

    Please check the completeness and integrity of the delivery and notify your distribution partner immediately after purchase if the delivery is not complete or if it is damaged. Product includes: X Spotlight X Power cable X 2 Omega brackets X User manual INTRODUCTION ZENIT W600 SMD PROFESSIONAL OUTDOOR WASHLIGHT CLZW600SMD...
  • Page 10: Connections, Operating And Display Elements

    Connection via supplied power cable (when not in use, always close with rubber sealing cap). POWER OUT IP65 power output socket with rubber sealing cap. Facilitates power supply to other CAMEO spotlights. Ensure that the total current consumption of all connected devices does not exceed the value specified on the device in amperes (A) (when not in use, always close with the rubber sealing cap).
  • Page 11 • As soon as the spotlight is connected, the following are displayed in succession: "Welcome to Cameo", the model name and the software version. During the start-up process, the previously set operating mode is activated and the spotlight is ready for operation after a short time.
  • Page 12: Operation

    • If one of the DMX operating modes is activated and there is no DMX signal to the DMX input, the currently programmed DMX address is displayed and the characters on the display will begin to flash. • Press MODE to go up one level in the menu structure. To go to the main display in the menu structure, press MODE repeatedly.
  • Page 13 W-DMX™ To pair a W-DMX receiver with a W-DMX compatible transmitter , the Reset command must be executed in the menu item WDMX under Receiver (select Reset and confirm). The receiver is now in pairing standby and waiting for a pairing request from a transmit- ter.
  • Page 14 CONFIGURING DMX MODE (DMX MODE) Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item DMX Mode (observe arrow) and confirm with ENTER. In the submenu, you can now select the desired DMX mode with UP and DOWN. Confirm your selection with ENTER.
  • Page 15 AUTO MODE (Auto Program 1 – 6) The 6 different auto programs each comprise non-editable color-change sequences. Brightness and speed are independently adjustable. Select auto mode as described above under „CONFI- GURE STANDALONE MODE” and confirm with ENTER. Now use UP and DOWN to select one of the 6 auto programs (observe arrow) and confirm with ENTER.
  • Page 16 STATIC MODE (Static) Static mode allows the Dimmer, Strobe and RGBW functions to be adjusted directly on the device with values between 000 to 255, similar to a DMX control unit. In this way, an individual scene can be created without an additional DMX controller. Select Static mode as per the procedure previously described in CONFIGURE STANDALONE MODE and confirm with ENTER.
  • Page 17 USER PRESETS (User Color) The operating mode “User Presets” allows you to store five individual color presets of overall brightness, strobe and a color mix of R, G, B and W directly in the device. Select User Color mode as per the procedure previously described in CONFIGURE STAND ALONE MODE and confirm with ENTER.
  • Page 18 TIMER FUNCTION (Timer) The timer function allows the standalone modes Color Macro, Static, Tunable White and User Color to be timer controlled in such a way that the fade-in time can be set from 0 to 60 minutes, the dwell time from 1 to 24 hours and the fade-out time from 0 to 60 minutes. Time control starts immediately after activating the timer function in the previously activated standalone mode and remains active even if the spotlight is switched off and restarted.
  • Page 19 SYSTEM SETTINGS (Settings) Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item Settings (observe arrow) and confirm with ENTER. ---------------- Menu ---------------- DMX Address DMX Mode Stand Alone Slave Settings System Info This will take you to the submenu for setting the following submenu items (see table, select with UP and DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER):...
  • Page 20 Dimmer = Dimmer curve Linear Light intensity increases linearly with Curve DMX value Exponential Light intensity can be finely adjusted at lower DMX values and broadly adjusted at higher DMX values Logarithmic Light intensity can be broadly adjusted at lower DMX values and finely adjusted at higher DMX values S-curve Light intensity can be finely adjusted at...
  • Page 21 Mirror = Mirror arrangement No mirroring Pixel of pixel segments Vertical Mirror vertically Horizontal Mirror horizontally Vertical + Mirror vertically and horizontally Horizontal Factory = Restore factory Reset Now? Restore factory settings: Reset settings Confirm with ENTER. Cancel with MODE Dimmer curves linear exponential...
  • Page 22 Use the UP and DOWN controls to select the desired submenu item, and press ENTER to display the corresponding information. System Info Firmware = Displays Main CPU Vx.xx Device Firmware Vx.xx Driver1 Vx.xx Driver2 Temperature = Temperature display xx °C / xx °F LED unit Unit °C (= display in degrees Celsius)
  • Page 23: Setup And Installation

    SETUP AND INSTALLATION Thanks to its integrated plastic feet, the light can be positioned in a suitable location on a level surface. Mounting to a traverse is possible using an Omega bracket which is attached at the cen- tre of the device base (A) or else by means of two Omega bracket, which are mounted at the outer attachment positions (B).
  • Page 24: Care, Maintenance And Repair

    CARE, MAINTENANCE AND REPAIR In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned and, if necessary, maintained. The maintenance requirement depends on the intensity of use and the environment in which it is used. We generally recommend a visual inspection before each operation.
  • Page 25: Optional Accessories

    PLEASE NOTE!For conversion or retrofit sets provided by the manufacturer, it is essential to observe the installation instructions included. CLEAN FAN The three fans on the back of the LED unit of the spotlight must be regularly checked and, if necessary, cleaned.
  • Page 26: Dmx Technology

    DMX TECHNOLOGY DMX-512 DMX (Digital Multiplex) is the name for a universal communication protocol for communication between corresponding devices and controllers. A DMX controller sends DMX data to the attached DMX device(s). The DMX data transmission is always a serial data stream which is sent from one connected device to the next via the DMX IN and DMX OUT sockets on any DMX-enabled device (XLR connectors), whereby the maximum number of devices may not exceed 32.
  • Page 27 CONNECTOR ASSIGNMENT: DMX cable with 3-pin XLR connectors: DMX cable with 5-pin XLR connectors (pins 4 and 5 are not used.) Shield Shield DMX TERMINATOR: To avoid system failures, the last device in a DMX chain must be equipped with a terminating resistor (120 ohms, 1/4 watt).
  • Page 28: Technical Data

    TECHNICAL DATA Product number: CLZW600SMD Product type: LED wash light Type: Outdoor spotlight LED color spectrum: RGBW Number of LEDs: LED type: 4-in-1 SMD LED PWM frequency: 800 Hz, 1200 Hz, 2000 Hz, 3600 Hz, 12 kHz, 25 kHz (adjustable) Beam angle: 118°...
  • Page 29: Explanation Of Ip Protection Class

    Protection class: IP65 Tilt Rotation 158° (manual) Use position: As required Minimum distance to 0.5 m illuminated surface: Minimum distance to normal 0.3 m flammable materials: Dimensions 463 x 291 x 161 mm. (W x H x D, without mounting bracket): Weight (not including acces- 12.4 kg sories):...
  • Page 30: Minimum Distance To Illuminated Surface

    The IP rating of the product can be found in the technical data and is printed on the device. MINIMUM DISTANCE TO ILLUMINATED SURFACE This symbol with distance specification in metres (m) indicates the minimum 0.5 m distance between the light head and the illuminated surface. In this example the distance is 0.5 m.
  • Page 31 UKCA- CONFORMITY Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable) Electrical Equipment (Safety) Regulations 2016 Electromagnetic Compatibility Regulations 2016 (SI 2016/1091) The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 (SI 2012/3032) Radio Equipment Regulations 201 7(SI 2016/2015) UKCA- DECLARATION OF CONFORMITY...
  • Page 32: Informationen Zu Dieser Bedienungsanleitung

    DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 2 CH Function Values Factory- Calibrated Dimmer 000 - 255 0% to 100% 000 - 006 Warm white 007 - 046 Warm white -> 2700K 047 - 047 Bulb White (2700K) 048 - 087 2700K ->...
  • Page 33: Sicherheitshinweise

    3 CH Color Function Values Presets Dimmer 000 - 255 0% to 100% 000 - 005 Strobe open 006 - 010 Strobe closed 011 - 033 Pulse Random, slow -> fast 034 - 056 Ramp up Random, slow -> fast Multi- functional 057 - 079 Ramp down Random, slow ->...
  • Page 34 10 CH 15 CH Full Area- Full Area- Function Values Access Access Group 8 Bit 16 Bit Dimmer - 255 0% to 100% Dimmer Dimmer fine - 255 0% to 100% - 005 Strobe open - 010 Strobe closed Pulse Random, - 033 slow ->...
  • Page 35 - 005 Color off - 013 Red - 021 Amber - 029 Yellow warm - 037 Yellow - 045 Green - 053 Turquoise - 061 Cyan - 069 Blue - 077 Lavender - 085 Mauve Color Presets Color - 093 Magenta (override Presets - 101 Pink...
  • Page 36 - 005 Off - 006 Warm white Warm white -> - 046 2700K - 047 Bulb White (2700K) - 087 2700K -> 3200K Halogen White - 088 (3200K) Color Tempe- - 128 3200K -> 4000K rature Color Neutral White (works only if Tempera- - 129 (4000K)
  • Page 37 - 057 no function - 059 Pixel Mirroring Off (hold 3s) - 061 Pixel Mirroring Vertical (hold 3s) - 063 Pixel Mirroring Horizontal (hold 3s) Pixel Mirroring - 065 Vertical + Horizon- tal (hold 3s) - 077 no function - 079 Dimmer Response LED (hold 1,5s) - 081 Dimmer Response Halogen (hold 1,5s)
  • Page 38: Hinweise Für Ortsveränderliche Outdoor-Geräte

    36 CH 42 CH RGB RGB Pixel- Pixelcontrol control calibrated Function Values Group calibrated & Master- Dimmer 000 - 255 0% to 100% Dimmer Dimmer fine 000 - 255 0% to 100% 000 - 005 Strobe open 006 - 010 Strobe closed Pulse Random, slow 011 - 033 ->...
  • Page 39: Einführung

    Pixel 1 R 000 - 255 0% to 100% Pixel 1 G 000 - 255 0% to 100% Pixel 1 B 000 - 255 0% to 100% Pixel 1 W 000 - 255 0% to 100% Pixel 2 R 000 - 255 0% to 100% Pixel 2 G 000 - 255 0% to 100% Pixel 2 B...
  • Page 40 005 no function 063 Linear Dimmer Curve Exponential Dimmer Dimmer Curve Curve Dimmer Curve Logarithmic Dimmer Curve 255 S-Curve Dimmer Curve 057 no function Pixel Mirroring Off (hold Pixel Mirroring Vertical (hold 3s) Pixel Mirroring Horizontal (hold 3s) Pixel Mirroring Vertical + Horizontal (hold 3s) 077 no function Dimmer Response LED...
  • Page 41 39 CH 87 CH Full Area Full Pattern Access Function Values 16 Bit Pixel- Group control & Pattern Dimmer 000 - 255 0% to 100% Dimmer Dimmer 0% to 100% 000 - 255 fine 000 - 005 Strobe open 006 - 010 Strobe closed 011 - 033 Pulse Random, slow ->...
  • Page 42: Bedienung

    Pixel 1 R 000 - 255 0% to 100% Pixel 1 G 000 - 255 0% to 100% Pixel 1 B 000 - 255 0% to 100% Pixel 1 W 000 - 255 0% to 100% Pixel 2 R 000 - 255 0% to 100% Pixel 2 G 000 - 255 0% to 100% Pixel 2 B...
  • Page 43 000 - 005 Off 006 - 006 Warm White 007 - 046 Warm White -> 2700K 047 - 047 Bulb White (2700K) Color Tem- 048 - 087 2700K -> 3200K perature 088 - 088 Halogen White (3200K) (works only Color 089 - 128 3200K ->...
  • Page 44 Background 0-100% 000 - 255 Dimmer Background 0-100% Dimmer 000 - 255 fine 000 - 005 Strobe open 006 - 010 Strobe closed 011 - 033 Pulse Random, slow -> fast Ramp up Random, slow -> 034 - 056 fast Ramp down Random, slow Background 057 - 079...
  • Page 45 Background 0% to 100% 000 - 255 Blue Background 0% to 100% 000 - 255 Blue fine Background 0% to 100% 000 - 255 White Background 0% to 100% 000 - 255 White fine 000 - 005 Color off 006 - 013 Red 014 - 021 Amber 022 - 029 Yellow warm 030 - 037 Yellow...
  • Page 46 Background 000 - 005 Off Backgro- CCT Tint 006 - 127 Magenta -> Neutral 128 - 128 Neutral (affects (all bac- Neutral -> Green Color Tem- kground 129 - 255 perature) functions 000 - 005 0s are enabled Background 006 - 105 0,1s - 10s (0,1s Steps) with Color Macro 106 - 214 11s - 119s (1s Steps)
  • Page 47 000 - 057 no function 058 - 059 Pixel Mirroring Off (hold 3s) Pixel Mirroring Vertical (hold 060 - 061 Pixel Mirroring Horizontal 062 - 063 (hold 3s) Pixel Mirroring Vertical + 064 - 065 Horizontal (hold 3s) 066 - 077 no function Dimmer Response LED 078 - 079 (hold 1,5s)
  • Page 48 48 CH 54 CH RGBW RGBW Pixelcontrol Pixelcontrol Function Values User-Calibra- User-Calibra- Group & Masterdim Dimmer 000 - 255 0% to 100% Dimmer Dimmer 000 - 255 0% to 100% fine 000 - 005 Strobe open 006 - 010 Strobe closed Pulse Random, slow 011 - ->...
  • Page 49 Pixel 1 R 000 - 255 0% to 100% Pixel 1 G 000 - 255 0% to 100% Pixel 1 B 000 - 255 0% to 100% Pixel 1 W 000 - 255 0% to 100% Pixel 2 R 000 - 255 0% to 100% Pixel 2 G 000 -...
  • Page 50 no function Linear Dimmer Curve Exponential Dimmer Dimmer Curve Dimmer Curve Curve Logarithmic Dimmer Curve S-Curve Dimmer Curve no function Pixel Mirroring Off (hold Pixel Mirroring Vertical (hold 3s) Pixel Mirroring Horizontal (hold 3s) Pixel Mirroring Vertical + Horizontal (hold 3s) no function Dimmer Response LED (hold 1,5s)
  • Page 51 EN: (1*) After the adjustments have been made, set the value to 000 to avoid disturbance by endless function call. DE: (1*) Nachdem die Einstellungen vorgenommen wurden, stellen Sie den Wert auf 000 ein, um Störungen durch endlosen Funktions- aufruf zu vermeiden. FR: (1*) Une fois les ajustements effectués, réglez la valeur sur 000 pour éviter les perturbations par appel de fonction sans fin.
  • Page 55: Optionales Zubehör

    CAMEOLIGHT.COM Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany Phone: +49 6081 9419-0 | adamhall.com REV: 01...

This manual is also suitable for:

Clzw600smd

Table of Contents