Isotek ULTIMATE Series Installation Instructions Manual

EVO3 SUPER NOVA
INSTALLATION INSTRUCTIONS

SAFETY FIRST
PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE INSTALLATION
DO NOT expose this product to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed near the apparatus. If liquid enters the chassis immediately unplug from the wall socket.
DO NOT impede ventilation by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc.;
DO NOT expose this product to naked flame sources, such as lighted candles,
these should not be placed near the apparatus;
MAKE SURE that this appliance (CLASS 1) is connected to a mains outlet socket with protective earth.
PLEASE NOTE that the mains plug is used as the disconnect device and must remain readily operable.
OUTPUT SOCKETS
ADDITIONAL INFORMATION ON FUSING AND RATINGS
A
The eight output sockets marked 'A' are designed for use with CD players, pre amplifiers, music servers, digital to
analogue converters, loads of typically no greater than 500W. These are protected by two 20A circuit breakers which
can be located at the rear of the chassis.
The rated maximum total load for all eight sockets together (A) is 20A 4600W.
PLEASE NOTE
This product should not be used to supply power to integrated amplifiers, stereo-/ mono- /multi-channel power
amplifiers, active sub woofers, active loudspeakers or similar. For this equipment please use Super Titan or other
Titan models in our range.
A
SERVICE & REPAIR
NO USER SERVICEABLE PARTS INSIDE
Should the unit fail, or cease to function, or function in a manner which seems unusual, please immediately turn off
and unplug from the mains supply.
Send an email to: support@isoteksystems.com
1