Isotek EVO3 NOVA Installation Instructions Manual

EVO3 NOVA
INSTALLATION INSTRUCTIONS

SAFETY FIRST
PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE INSTALLATION
DO NOT expose this product to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed near the apparatus. If liquid enters the chassis immediately unplug from the wall socket.
DO NOT impede ventilation by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc.;
DO NOT expose this product to naked flame sources, such as lighted candles,
these should not be placed near the apparatus;
MAKE SURE that this appliance (CLASS 1) is connected to a mains outlet socket with protective earth.
PLEASE NOTE that the mains plug is used as the disconnect device and must remain readily operable.
OUTPUT SOCKETS
ADDITIONAL INFORMATION ON FUSING AND RATINGS
A
The four output sockets marked 'A' are designed for use with power amplifiers, sub-woofers or active loudspeaker
systems. These sockets are protected by a 16A circuit breaker which can be located under the chassis.
B
The eight output sockets marked 'B' are designed for use with CD players, pre amplifiers, music servers, digital to
analogue converters, loads of typically no greater than 200W. These are protected by a 10A circuit breaker which can be
located under the chassis.
The rated maximum total load for all twelve sockets together (A + B) is 16A 3680W.
Max Total for 4 output sockets 16A 3680Watts
16A Max Total
4 output sockets = 16A
8 output sockets = 10A
©2018 Audio Power Systems GmbH
All rights reserved
SERVICE & REPAIR
NO USER SERVICEABLE PARTS INSIDE
Should the unit fail, or cease to function, or function in a manner which seems unusual, please immediately turn off
and unplug from the mains supply.
Send an email to: support@isoteksystems.com
A
Max Total for 8 output sockets 10A 2300Watts
B
1