Sennheiser EW 500 Manual page 84

CH NO
Assigning a channel number
Ch no
You now have to assign the frequency memory a channel number (from 0 to
255). With larger systems, we recommend using the same channel numbers
for both transmitters and receivers in order to provide for simpler monitoring
of the system.
Assigning a name to a frequency memory (EM 500 only)
NAME
With the EM 500 receiver, each frequency memory can be assigned a name
in addition to the receiving frequency and channel number. The name can
consist of up to six characters such as:
You can, for example, enter the name of the musician for whom the adjust-
ments have been made.
Select the frequency memory for which you wish to assign a channel
number (u "Selecting a frequency memory").
Select the "CH NO" menu by pressing the
appears on the display; after a short pause the currently assigned
channel number is displayed.
With the buttons you can now select a different channel number.
/
The new channel number starts flashing on the display and becomes
effective immediately.
Note:
Channel numbers which have already been assigned to a fixed
frequency memory are skipped.
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
letters (without pronounciation marks),
numbers from 1 to 0,
special characters e.g. () - _ and spaces.
Select the frequency memory for which you wish to enter a name (u
"Selecting a frequency memory").
Select the "NAME" menu by pressing the
appears on the display; after a short pause the name entered for the
selected frequency memory is displayed.
Press the buttons to start with your entry. The first segment starts
/
flashing on the display.
With the buttons you can now choose a character.
/
Press the SET button to change to the next segment and choose the
next character.
Have you entered the name completely? Press the
to the top menu level. The display then switches back to the standard
display.
SET button until "CH NO"
SET button until "NAME"
SET button to return
81