ASROCK EC266D2I User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. EC266D2I
  6. User manual
ASROCK EC266D2I User Manual

ASROCK EC266D2I User Manual

Server/workstation motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
EC266D2I
EC266D2I-2T/AQC
Version 1.0
Published November 2023
Copyright©2023 ASRock Rack INC. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EC266D2I and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ASROCK EC266D2I

Summary of Contents for ASROCK EC266D2I

  • Page 1 User Manual EC266D2I EC266D2I-2T/AQC Version 1.0 Published November 2023 Copyright©2023 ASRock Rack INC. All rights reserved.
  • Page 2 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock Rack has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 3 INTEL END USER SOFTWARE LICENSE AGREEMENT IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software only in its unmodified and binary form, (with the accompanying documentation, the “Software”) for Licensee’s personal use only, and not commercial use, in connection with Intel-based products for which the Software has been provided, subject to the following conditions: (a) Licensee may not disclose, distribute or transfer any part of the Software, and You agree...
  • Page 4 If you require assistance please call ASRock Rack Tel : +886-2-55599600 ext.123 (Standard International call charges apply) Licensee’s specific rights may vary from country to country.
  • Page 5 ASRock Rack follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASRock Rack product is in line with global environmental regulations. In addition, ASRock Rack disclose the relevant in- formation based on regulation requirements.

  • Page 6: Table Of Contents

    Contents Chapter 1 Introduction Package Contents Specifications Unique Features Motherboard Layout Onboard LED Indicators Block Diagram Chapter 2 Installation Screw Holes Pre-installation Precautions Installing the CPU Installing the CPU Fan and Heatsink Installing Memory Modules (DIMM) Expansion Slot (PCI Express Slot) Jumper Setup Onboard Headers and Connectors Unit Identification purpose LED/Switch...
  • Page 7 3.1.2 Navigation Keys Main Screen 3.2.1 Motherboard Information 3.2.2 Processor Information 3.2.3 Memory Information Advanced Screen 3.3.1 CPU Configuration 3.3.2 DRAM Configuration 3.3.3 Chipset Configuration 3.3.4 Storage Configuration 3.3.5 NVME Configuration 3.3.6 ACPI Configuration 3.3.7 USB Configuration 3.3.8 Super IO Configuration 3.3.9 Serial Port Console Redirection 3.3.10 H/W Monitor 3.3.11 Network Stack Configuration...
  • Page 8 3.4.2 DNS Configuration 3.4.3 System Event Log 3.4.4 BMC Tools Event Logs Security Screen 3.6.1 Key Management Boot Screen Exit Screen Chapter 4 Software Support Download and Install Operating System Download and Install Software Drivers Contact Information Chapter 5 Troubleshooting Troubleshooting Procedures Technical Support Procedures Returning Merchandise for Service...

  • Page 9: Chapter 1 Introduction

    In case any modifications of this manual occur, the updated version will be available on ASRock Rack website without further notice. Find the latest memory and CPU support lists on ASRock Rack website as well. ASRock Rack’s Website: www.ASRockRack.com About this motherboard technical support, please visit the website for specific information http://www.asrockrack.com/support/...

  • Page 10: Specifications

    1.2 Specifications EC266D2I, EC266D2I-2T/AQC MB Physical Status Form Factor mini-ITX Dimension 6.7'' x 6.7'' (17.02cm x 17.02cm) Processor System Supports Intel® Xeon® E-2400 series processors Socket Single Socket (LGA1700) Thermal Design Power (TDP) Chipset Intel® C266 System Memory Supported 2 DIMM slots (1DPC)
  • Page 11 Type AMI 256Mb SPI Flash ROM Features Plug and Play, ACPI 6.4 and above compliance wake up events, SMBIOS 2.8 and above, ASRock Rack Instant Flash Internal Connectors/Headers PSU Connector 1 Micro-Fit (4-pin, ATX PSU signal) w/ ATX 24-pin adapter...
  • Page 12 Thermal Sensor Header TPM Header 1 (13-pin, SPI) SGPIO Header SMbus Header PMbus Header IPMB Header IPMI LAN LED 1 (4-pin) Header NCSI Header 1 (9-pin) UID Header 1 (4-pin) Clear CMOS 1 (contact pads) LED Indicators Standby Power 1 (5VSB) Fan Fail LED BMC Heartbeat Support OS...

  • Page 13: Unique Features

    . With this utility, press the <F6> key during the POST or the <F2> key to enter into the BIOS setup menu to access ASRock Rack Instant Flash. Just launch this tool and save the new BIOS file to the USB flash drive, floppy disk or hard drive, then update the BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility.

  • Page 14: Motherboard Layout

    1.4 Motherboard Layout 17.02 cm (6.7 in) BMC_SMB1 IPMB1 ATX4PIN1 SATA_PWR1 ATX12V1 DDR5_B1 DDR5_A1 IPMI_LED1 M2_1 UID_HD EC266D2I EC266D2I-2T/AQC COM1 NCSI1 CPU1 CLRCMOS1 PWM_CFG1 Intel® UID1 C266 OCU1 SPEED OCU2 UID_LED1 AST2600 USB3_3_4 ITX_AUX_PANEL1 PANEL1 PCIE7 BAT1...
  • Page 15 EC266D2I EC266D2I-2T/AQC Description BMC SMBus Header (BMC_SMB1) Intelligent Platform Management Bus Header (IPMB1) SATA Power Connector (SATA_PWR1) ATX 12V Power Connector (ATX12V1) Micro-Fit Power Connector (ATX4PIN1) 1 x 288-pin DDR5 DIMM Slots (DDR5_B1)* 1 x 288-pin DDR5 DIMM Slots (DDR5_A1)*...

  • Page 16: Onboard Led Indicators

    1.5 Onboard LED Indicators Item Status Description SB_PWR1 Green STB PWR ready LED_FAN1 FAN1 failed LED_FAN2 FAN2 failed LED_FAN3 FAN3 failed BMC_LED1 Green BMC heartbeat LED...
  • Page 17 EC266D2I EC266D2I-2T/AQC 1.6 I/O Panel EC266D2I: No. Description No. Description VGA Port (VGA1) LAN RJ-45 Port (IPMI_LAN)* 1G LAN RJ-45 Port (LAN1, shared NIC)** UID Switch (UID1) 1G LAN RJ-45 Port (LAN2)** UID LED (UID_LED1) USB 3.2 Gen1 Ports (USB3_1_2) EC266D2I-2T/AQC: No.
  • Page 18 **There is an LED on each side of 1G LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port 1G LAN Port LED Indications ( EC266D2I only) Activity / Link LED Speed LED Status Description...
  • Page 19 ***There is an LED on each side of 10G LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port 10G LAN Port LED Indications ( EC266D2I-2T/AQC only) Activity / Link LED Speed LED Status Description...

  • Page 20: Block Diagram

    1.7 Block Diagram INTEL Channel A DDR5 up to 4800 Processor PCIE5.0 SLOT7 x16 LGA-1700 Pin Socket Channel B DDR5 up to 4800 M.2_1 (PCIE4.0) USB3.2 Gen1 USB3.2 5 Gb/s HSIO 0-1 2 front header Type A HSIO 22-25 PCIE4.0x4 / SATA[0:3] OCULINK1 IPMI LAN_USB3.2 Gen1 USB3.2...

  • Page 21: Chapter 2 Installation

    EC266D2I EC266D2I-2T/AQC Chapter 2 Installation This is a mini-ITX form factor (6.7'' x 6.7'', 17.02cm x 17.02cm) motherboard. Before installing the motherboard, study the configuration of the chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries and motherboard damages.

  • Page 22: Installing The Cpu

    2.3 Installing the CPU 1. Before inserting the 1700-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
  • Page 23 EC266D2I EC266D2I-2T/AQC Please save and replace the cover if the processor is removed. The cover must be placed if wishing to return the motherboard for after service.

  • Page 24: Installing The Cpu Fan And Heatsink

    2.4 Installing the CPU Fan and Heatsink...

  • Page 25: Installing Memory Modules (Dimm)

    EC266D2I EC266D2I-2T/AQC 2.5 Installing Memory Modules (DIMM) This motherboard provides two 288-pin DDR5 (Double Data Rate 5) DIMM slots, and supports Single Channel Memory Technology. It is not allowed to install a DDR, DDR2, DDR3 or DDR4 memory module into a...

  • Page 26: Expansion Slot (Pci Express Slot)

    2.6 Expansion Slot (PCI Express Slot) There is a PCI Express slot on this motherboard. PCIE slot: PCIE7 (PCIe 5.0 x16 slot) is used for PCI Express x16 lane width cards. Slot Generation Mechanical Electrical Source PCIE 7 CPU1 Installing an expansion card Step 1.

  • Page 27: Jumper Setup

    EC266D2I EC266D2I-2T/AQC 2.7 Jumper Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when a jumper cap is placed on these 2 pins.

  • Page 28: Onboard Headers And Connectors

    2.8 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power switch, PLED+ PLED-...
  • Page 29 EC266D2I EC266D2I-2T/AQC IntA_PA_D+ USB 3.2 Gen1 Header Besides two default USB IntA_PA_D- (19-pin USB3_3_4) 3.2 Gen1 ports on the I/ IntA_PA_SSTX+ IntA_PA_SSTX- (see p.6, No. 23) O panel, there is one USB IntA_PA_SSRX+ 3.2 Gen1 header on this IntA_PA_SSRX- Vbus motherboard.
  • Page 30 NCSI Header The onboard NCSI header CRS_DV RXD0 (9-pin NCSI1) is used for external RXD1 (see p.6, No.27) connections. CLK_IN TXD1 TXD0 TX Enable Serial General Purpose The header supports Serial SCLOCK Input/Output Header Link interface for onboard SLOAD (7-pin SATA_SGPIO1) SATA connections.
  • Page 31 EC266D2I EC266D2I-2T/AQC ATX 12V Power Connector This motherboard provides (8-pin ATX12V1) one 8-pin ATX 12V power (see p.6, No. 4) connector. Micro-Fit ATX 4Pin The motherboard provides ATX_PWROK one 4-pin power/signal Power Connector ATX_+5VSB PSON# (4-pin ATX4PIN1) connector which is a...
  • Page 32 PSU SMBus PSU SMBus monitors the +3VSB (PSU_SMB1) status of the power supply, ALERT (see p.6, No. 8) fan and system temperature. SMBDATA SMBCLK System Fan Please connect fan cables FAN_SPEED_CONTROL FAN_SPEED Connectors to the fan connectors and FAN_VOLTAGE (4-pin FAN1) match the black wire to the (see p.6, No.

  • Page 33: Unit Identification Purpose Led/Switch

    EC266D2I EC266D2I-2T/AQC 2.9 Unit Identification purpose LED/Switch The UID button allows user to locate the server working on from behind a rack of servers. Unit Identification When the UID button on the purpose LED/Switch front or rear panel is pressed,...

  • Page 34: Atx Psu / Dc-In Power Connections

    2.10 ATX PSU / DC-IN Power Connections This motherboard supports both +12V DC and ATX power input. Please refer to the table below for the required connections between the motherboard and the power supply. Connector DC-IN ATX PSU 12V 8pin ATX 4pin (with the bundled ATX 24pin-to-4pin converter cable)

  • Page 35: Dual Lan And Teaming Operation Guide

    EC266D2I EC266D2I-2T/AQC 2.11 Dual LAN and Teaming Operation Guide Dual LAN with Teaming enabled on this motherboard allows two single connections to act as one single connection for twice the transmission bandwidth, making data transmission more effective and improving the quality of transmission of distant images. Fault tolerance on the dual LAN network prevents network downtime by transferring the workload from a failed port to a working port.

  • Page 36: Ssd Module Installation Guide

    2.12 M.2 SSD Module Installation Guide The M.2 Socket (M2_1, Key M) supports type 2280 M.2 PCI Express module up to Gen4 x4 (16GT/s x4). Installing the M.2 SSD Module Step 1 Prepare a M.2 SSD module and the screw. Step 2 Gently insert the M.2 SSD module into the M.2 slot.

  • Page 37: Chapter 3 Uefi Setup Utility

    EC266D2I EC266D2I-2T/AQC Chapter 3 UEFI Setup Utility 3.1 Introduction This section explains how to use the UEFI SETUP UTILITY to configure the system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. Run the UEFI SETUP UTILITY when starting up the computer. Please press <F2> or <Del> during the Power- On-Self-Test (POST) to enter the UEFI SETUP UTILITY;...

  • Page 38: Navigation Keys

    3.1.2 Navigation Keys Please check the following table for the function description of each navigation key. Navigation Key(s) Function Description Moves cursor left or right to select Screens Moves cursor up or down to select items + / - To change option for the selected items <Tab>...

  • Page 39: Main Screen

    EC266D2I EC266D2I-2T/AQC 3.2 Main Screen Once entering the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. The Main screen provides system overview information and allows user- to set the system time and date.

  • Page 40: Motherboard Information

    3.2.1 Motherboard Information Press [Enter] to view the information of the motheboard. 3.2.2 Processor Information Press [Enter] to view the information of the processor.

  • Page 41: Memory Information

    EC266D2I EC266D2I-2T/AQC 3.2.3 Memory Information Press [Enter] to view the information of the memory.

  • Page 42: Advanced Screen

    3.3 Advanced Screen In this section, set the configurations for the following items: CPU Configuration, DRAM Configuration, Chipset Configuration, Storage Configuration, NVMe Configuration, ACPI Configuration, USB Configuration, Super IO Configuration, Serial Port Console Redirection, H/W Monitor, Network Stack Configuration, Intel SPS Configuration, Drive Health, RAM Disk Configuration, Tls Auth Configuration and Instant Flash.

  • Page 43: Cpu Configuration

    EC266D2I EC266D2I-2T/AQC 3.3.1 CPU Configuration Intel(R) Hyper Threading Technology Intel Hyper Threading Technology allows multiple threads to run on each core, so that the overall performance on threaded software is improved. Active Performance-Cores Select the number of cores to enable in each processor package.
  • Page 44 CPU C6 State Support Use this item to enable C6 deep sleep state for lower power consumption. CPU C7 State Support Use this item to enable C7 deep sleep state for lower power consumption. Package C State Support Use this item to enable CPU, PCIe, Memory, Graphics C State Support for power saving. Intel (VMX) Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.
  • Page 45 EC266D2I EC266D2I-2T/AQC Enable Intel TXT Support Enable the utilization of additional hardware capabilities provided by Intel(R) Trusted Execution Technology. It requires a full power cycle to change this for taking effect. CPU Thermal Throttling Enable CPU internal thermal control mechanisms to keep the CPU from overheating.

  • Page 46: Dram Configuration

    3.3.2 DRAM Configuration DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assign the appropriate frequency automatically.

  • Page 47: Chipset Configuration

    EC266D2I EC266D2I-2T/AQC 3.3.3 Chipset Configuration Re-Size BAR Support If system has Resizable BAR capable PCIe Devices, select this item to enable or disable Resizable BAR Support. Internal Graphics Use this item to keep IGFX enabled based on the setup options.
  • Page 48 PCIE Link Width Select this item to configure PCIE Link Width. PCIE7 Link Width Select the Link Width for PCIE7. PCIE Link Speed Select PCIE Link Speed. PCIE7 Link Speed Configure the PCIe Speed for PCIE7. M2_1 Link Speed Configure the PCIe Speed for M2_1. OCU1/2 Link Speed Configure the PCIe Speed for OCU1/2.

  • Page 49: Storage Configuration

    EC266D2I EC266D2I-2T/AQC 3.3.4 Storage Configuration SATA Controller Select this item to enable or disable the SATA controllers. SATA Mode Selection AHCI: Supports new features that improve performance. RAID: Combine multiple disk drives into a logical unit. Please press <CTRL-I> to enter RAID ROM during UEFI POST process.

  • Page 50: Nvme Configuration

    3.3.5 NVME Configuration The NVMe Configuration displays the NVMe controller and Drive information.

  • Page 51: Acpi Configuration

    EC266D2I EC266D2I-2T/AQC 3.3.6 ACPI Configuration PCIE Devices Power On Allow the system to be waked up by a PCIE device and enable wake on LAN. Ring-In Power On Allow the system to be waked up by onboard COM port modem Ring-In signals.

  • Page 52: Usb Configuration

    3.3.7 USB Configuration This page displays the information of the USB controllers and USB devices.

  • Page 53: Super Io Configuration

    EC266D2I EC266D2I-2T/AQC 3.3.8 Super IO Configuration Serial Port 1 Configuration Use this item to set parameters of Serial Port1 (COMA). Serial Port Use this item to enable or disable the serial port (COM). Change Settings Use this item to select an optimal setting for Super IO device.

  • Page 54: Serial Port Console Redirection

    3.3.9 Serial Port Console Redirection COM1 / SOL Console Redirection Use this item to enable or disable Console Redirection. If this item is set to Enabled, user can configure the Console Redirection Settings. Console Redirection Settings Use this item to configure Console Redirection Settings, and specify how the computer and host computer to which user are connected exchange information.
  • Page 55 EC266D2I EC266D2I-2T/AQC Bits Per Second Use this item to select the serial port transmission speed. The speed used in the host computer and the client computer must be the same. Long or noisy lines may require lower transmission speed. The options include [9600], [19200], [38400], [57600] and [115200].
  • Page 56 Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS) Console Redirection EMS Use this item to enable or disable Console Redirection. If this item is set to Enabled, user can configure the Console Redirection Settings. Console Redirection Settings Use this item to configure Console Redirection Settings, and specify how the computer and the host computer to which user are connected exchange information.

  • Page 57: H/W Monitor

    EC266D2I EC266D2I-2T/AQC 3.3.10 H/W Monitor In this section, it allows user to monitor the status of the hardware on the system, includ- ing the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.

  • Page 58: Network Stack Configuration

    3.3.11 Network Stack Configuration Network Stack Use this item to enable or disable UEFI Network Stack. IPv4 PXE Support Use this item to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available. IPv4 HTTP Support Use this item to enable or disable IPv4 HTTP boot support.
  • Page 59 EC266D2I EC266D2I-2T/AQC PXE Boot Wait Time Specifies the wait time and press the ESC key to abort the PXE boot. Media Detect Count Specifies the number of times the presence of physical storage device are verified on a system reset or power cycle.

  • Page 60: Intel Sps Configuration

    3.3.12 Intel SPS Configuration SPS screen displays the Intel SPS Configuration information, such as Operational Firmware Version and Firmware State.

  • Page 61: Driver Health

    EC266D2I EC266D2I-2T/AQC 3.3.13 Driver Health Inter (R) PRO/1000 6.5.01 PCI-E Healthy Provides Health Status for the Drivers/Controllers Inter (R) Gigabit 0.2.01 Healthy Provides Health Status for the Drivers/Controllers...

  • Page 62: Ram Disk Configuration

    3.3.14 RAM Disk Configuration Disk Memery Type Specifies type of memory to use from available memory pool in system to create a disk. Create raw Create a raw RAM disk. Create from file Create a RAM disk from a given file. Remove selected RAM disk(s) Remove selected RAM disk(s).

  • Page 63: Tls Auth Configuration

    EC266D2I EC266D2I-2T/AQC 3.3.15 Tls Auth Configuration Server CA Configuration Press <Enter> to configure Server CA. Client Cert Configuration Press <Enter> to configure Client Cert. Enroll Cert Press <Enter> to enroll cert. Delete Cert Press <Enter> to delete cert.

  • Page 64: Instant Flash

    3.3.16 Instant Flash Instant Flash is a UEFI flash utility embedded in Flash ROM. This convenient UEFI update tool allows user to update system UEFI without entering operating systems first like MS- ® DOS or Windows . Just save the new UEFI file to the USB flash drive, floppy disk or hard drive and launch this tool, then update the UEFI only in a few clicks without preparing an additional floppy diskette or other complicated flash utility.

  • Page 65: Server Mgmt

    EC266D2I EC266D2I-2T/AQC 3.4 Server Mgmt Wait For BMC Wait For BMC response for specified time out. BMC starts at the same time when BIOS starts during AC power ON. It takes around 255 seconds to initialize Host to BMC interfaces.
  • Page 66 OS Wtd Timer Timeout Configure the OS Boot Watchdog Timer Expiration between 1 to 30 min value. If the OS Boot Watchdog Timer is disabled, this item is not available. OS Wtd Timer Policy Configure how the system should respond if the OS Boot Watchdog Timer expires. If the OS Boot Watchdog Timer is disabled, this item is not available.

  • Page 67: Bmc Network Configuration

    EC266D2I EC266D2I-2T/AQC 3.4.1 BMC Network Configuration Bonding Setting Select this item to enabled or disabled bonding. Please enable all lan channel first when want to enable bonding. Lan Channel (Failover) Manual Setting IPMI LAN If [No] is selected, the IP address is assigned by DHCP. If using a static IP address, toggle to [Yes], and the changes take effect after the system reboots.
  • Page 68 The default login information for the IPMI web interface is: Username: admin Password: admin For more instructions on how to set up remote control environment and use the IPMI man- agement platform, please refer to the IPMI Configuration User Guide or go to the Support website at: http://www.asrockrack.com/support/faq.asp VLAN Select this item to enabled or disabled Virtual Local Area Network.

  • Page 69: Dns Configuration

    EC266D2I EC266D2I-2T/AQC 3.4.2 DNS Configuration Manual DNS Configuration Select this item to manual configure DNS. If [YES] is selected, configure the items below. DNS Service Select this item to enable or disable DNS Service Configuration. Host Name Settings Select this item to automatic or manual Host Name Settings.
  • Page 70 Domain Name Server Setting Select this item to configure DNS Server Settings. IP Priority Select this item to configure IP Priority.

  • Page 71: System Event Log

    EC266D2I EC266D2I-2T/AQC 3.4.3 System Event Log SEL Components Change this to enable ro disable event logging for error/progress codes during boot. Erase SEL Use this to choose options for earsing SEL. When SEL is Full Use this to choose options for reactions to a full SEL.

  • Page 72: Bmc Tools

    3.4.4 BMC Tools KCS Control Select this KCS interface state after POST end. If [Enabled] us selected, the BMC will remain KCS interface after POST stage. If [Disabled] is selected, the BMC will disable KCS interface after POST stage Restore AC Power Loss This allows user to set the power state after an unexpected AC/power loss.

  • Page 73: Event Logs

    EC266D2I EC266D2I-2T/AQC 3.5 Event Logs Change Smbios Event Log Settings Select this item to configure the Smbios Event Log Settings. When entering the item, the screen displays following sub-items: Smbios Event Log Select this item to enable or disable all features of the SMBIOS Event Logging during system boot.

  • Page 74: Security Screen

    3.6 Security Screen This section allows user to set or change the supervisor/user password for the system. For the user password item is allowed user to clear it. Supervisor Password Set or change the password for the administrator account. Only the administrator has authority to change the settings in the UEFI Setup Utility.
  • Page 75 EC266D2I EC266D2I-2T/AQC Install Default Secure Boot Keys Please install default secure boot keys if it’s the first time useing secure boot. Clear Secure Boot Keys Use this to clear the secure boot keys. Expert Key Management Enables expert users to modify Secure Boot Policy variables without variable authentica-...

  • Page 76: Key Management

    3.6.1 Key Management In this section, expert users can modify Secure Boot Policy variables without variable au- thentication. Factory Key Provision Install factory default Secure Boot keys after the platform reset and while the System is in Setup mode. Install Default Secure Boot Keys Please install default secure boot keys if it’s the first time useing secure boot.
  • Page 77 EC266D2I EC266D2I-2T/AQC Platform Key(PK) Enroll Factory Defaults or load certificates from a file: 1. Public Key Certificate in: a) EFI_SIGNATURE_LIST b) EFI_CERT_X509 (DER) c) EFI_CERT_RSA2048 (bin) d) EFI_CERT_SHAXXX 2. Authenticated UEFI Variable 3. EFI PE/COFF Image(SHA256) Key Source: Factory, Modified, Mixed...
  • Page 78 2. Authenticated UEFI Variable 3. EFI PE/COFF Image(SHA256) Key Source: Factory, Modified, Mixed Forbidden Signatures(dbx) Enroll Factory Defaults or load certificates from a file: 1. Public Key Certificate in: a) EFI_SIGNATURE_LIST b) EFI_CERT_X509 (DER) c) EFI_CERT_RSA2048 (bin) d) EFI_CERT_SHAXXX 2. Authenticated UEFI Variable 3.
  • Page 79 EC266D2I EC266D2I-2T/AQC b) EFI_CERT_X509 (DER) c) EFI_CERT_RSA2048 (bin) d) EFI_CERT_SHAXXX 2. Authenticated UEFI Variable 3. EFI PE/COFF Image(SHA256) Key Source: Factory, Modified, Mixed...

  • Page 80: Boot Screen

    3.7 Boot Screen In this section, it will display the available devices on the system for user to configure the boot settings and the boot priority. Boot Option #1~#6 Use this item to set the system boot order. UEFI USB Drive BBS Priorities Specifies the Boot Device Priority sequence from available UEFI USB Drives.
  • Page 81 EC266D2I EC266D2I-2T/AQC Full Screen Logo Enable to display boot logo or disable to show normal POST messages. The default value is [Enabled]. CSM (Compatibility Support Module) Select this item to enable or disable the Compatibility Support Module support. When enabling this item, the sub-items as below are displayed: Launch PXE OpROM Policy Select UEFI only to run those that support UEFI option ROM only.

  • Page 82: Exit Screen

    3.8 Exit Screen Save Changes and Exit Exit system setup after saving the changes. Discard Changes and Exit Exit system setup without saving any changes. Save Changes Save changes done so far to any of the setup options. Discard Changes Discard changes done so far to any of the setup options.

  • Page 83: Chapter 4 Software Support

    Please download the operating system from the OS manufacturer. Please refer to the OS documentation for more instructions. * Please download the Intel® SATA Floppy Image driver from the ASRock Rack’s website (www.asrockrack.com) to the USB drive while installing OS in SATA RAID mode.

  • Page 84: Chapter 5 Troubleshooting

    Chapter 5 Troubleshooting 5.1 Troubleshooting Procedures Follow the procedures below to troubleshoot the system. Always unplug the power cord before adding, removing or changing any hardware components. Failure to do so may cause physical injuries and damages to motherboard components. 1.
  • Page 85 1. Verify if the battery on the motherboard provides ~3VDC. Install a new battery if it does not. 2. Confirm whether the power supply provides adaquate and stable power. Other problems... 1. Try searching keywords related to the related problem on ASRock Rack’s FAQ page: http://www.asrockrack.com/support...

  • Page 86: Technical Support Procedures

    5.2 Technical Support Procedures If the problems are still unsolved, please contact ASRock Rack’s technical support with the following information: 1. Contact information 2. Model name, BIOS version and problem type. 3. System configuration. 4. Problem description. Contact ASRock Rack’s technical support at: http://www.asrockrack.com/support/tsd.asp...
  • Page 87 Contact Information If it needs to contact ASRock Rack or want to know more about ASRock Rack, you’re welcome to visit ASRock Rack’s website at http://www.asrockrack.com; or contact the dealer for further information. For technical questions, please submit a support request form at https://event.asrockrack.com/tsd.asp...

This manual is also suitable for:

Ec266d2i-2t/aqc

Table of Contents