SLIK PRO 300 Series Operating Instructions Manual

E646
PRO 300 SERIES Tripod
Operating Instructions
Thank you very much for choosing SLiK PRO 300 SERIES Tripod.
The SLiK Corporation has designed your tripod to be a sturdy,
rugged, dependable product that will provide you with many years of
satisfactory use.
Please take a few moments to read this operating instruction carefully
before use so that you can take full advantage of your Tripod's many
fine features.
Retain this operating instruction in case you might want to refer back to it.
LtCaution
This caution icon refers to information pertaining to important safety
procedures in preventing injuries, or damages which may occur as a
result of mishandling this product.
<S>
Prohibition
This prohibited icon refers to information pertaining to prohibited con-
tents. Please refer to instructions closely to avoid accidents.
Specification
PRO 330DX, PRO 330DX-B
Length folded 600mm
(237/12")
Max. operating height 1,570mm
(61 5/6")
Max. center column ext. 330mm
(13")
Weight 1.70kg
(3lbs 12 oz)
PRO 340DX, PRO 340DX-B
Length folded 490mm
(191/3")
Max. operating height 1,450mm
(571/12")
Max. center column ext. 290mm
(115/12")
Weight 1.70kg
(3lbs 12 oz)
PRO 330DX, PRO 330DX-B
Vertical tilt handle
Panning lock knob
<S>
Prohibition
This product has been designed to
handle equipment weighing under
3 kgs (6lbs 10 oz).
Do not overload.
Some equipment weighing over 3
kgs (6 Ibs 10 oz), such as long
lenses, may not balance well due
to its weight distribution. In such
case, please use a larger tripod.
Equipment that can be
used with this Tripod
GD
~
Moo""". wi"."",
Camera
mounting screw
Handle connecting
screw
Quick release
lock lever
Pan & Tilt handle
PRO 340DX, PRO 340DX-B
Leg lock lever
Main body
Upper part of
Center column
Center column
Pan Head
Quick release plate
3-Position leg angle
adjustment locks
LtCaution
Soft Grip is consumption and cannot be used permanently.
Please replace it whenever ragged.
Center column stopper
Pan head
Center column locking nut
Components
Soft grip
Leg lock
Rubber leg tip
Center column
base stopper
Leg
Lower part of
Center column
Prevent accidental equipment fall,or tripod
tipping over, by making sure all levers, knobs,
and handles on the tripod are securely tight-
ened, and that all three legs are opened all the
way.
Do not attach camera directly to the threaded
post of the Center column.
This may damage both camera and tripod.
Pan Head mounting post
<S)Proh;b;l;on ~
Setting up
LtCaution
\
Carrying a tripod with a camera left on can
result in unexpected accidents. We therefore,
recommend you to remove your camera while
carrying the tripod.
Carrying the Tripod
<S>
Prohibition