Putting The Diversity Receiver Into Operation; Inserting The Batteries/Accupack; Charging The Accupack; Connecting The Earphones - Sennheiser EK 300 IEM - 01-09 Instruction Manual

Putting the diversity receiver into
operation

Inserting the batteries/accupack

For powering the diversity receiver, you can either use two 1.5 V AA size
batteries or the rechargeable Sennheiser BA 2015 accupack (see "Accesso-
ries" on page 24).
Open the battery compartment by pushing the two catches
direction of the arrows and open the cover
Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
Close the battery compartment by pressing on the center of the
cover .
The battery compartment cover
click.

Charging the accupack

To charge the BA 2015 accupack:
Insert the diversity receiver into the L 2015 charger (see "Accessories"
on page 24).
The L 2015 charger can only charge the combination BA 2015
accupack/diversity receiver. Standard batteries (primary cells) or
individual rechargeable battery cells cannot be charged.

Connecting the earphones

Connect the earphones to the socket
The ground connection of the earphones cable serves as the
antenna for the second diversity section. For details on the
connector assignment, refer to the diagram on page 25.

Putting the diversity receiver into operation

locks into place with an audible
.
.
in the
7