aequinox Sumatra Quick Start Manual

Installing the
Step 1: Machine set-up
1. Carefully remove the machine and the
instructions from the box.
2. Keep the box in a dry storage area in
case it needs to be returned.
3. Connect the machine to the power
cable. (Input located under machine)
4. Connect the power cable to the power
source (230 volts).
Step 2: Installing the water filter
Please unpack the water filter and follow these steps:
1. Set the filter to "C"
Now, continue by going to: "menu" > "user menu" > "Descaling":
Set "water hardness" to corresponding number from the
measurement that you can take with the stick included.
Check and count how many squares change of colour. This is the
number you should put in.
The machine will now count the amount of litres used and notify you
when the filter must be replaced.
2. Hold it under water
shortly to release bubbles
Coffee machine
Attention
• Place the machine on a dry, level, and
uncluttered surface.
• Ensure at least 10cm of clearance on all
sides of the machine.
• Install the machine in an area with a
constant room temperature (20c).
!
Installing the water filter is
essential in preventing decalcification
of the machine!
3. Place the filter in the
water reservoir
1 = 480L
2 = 240L
3 = 120L
4 = 60L