Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TurboTronic LASER STICK VACUUM
Summary of Contents for TurboTronic LASER STICK VACUUM
- Page 1 INSTRUCTION MANUAL LASER STICK VACUUM TT-LZ6...
-
Page 2: Important Safeguards
® Thank you for buying ZL6 – Laser Stick Vacuum by TurboTronic TT-LZ6 cordless, rechargeable and powerful vacuum with laser illumination that reveals microscopic dust. Lightweight and can be used to clean hard to reach areas. Transforms into a handheld vacuum cleaner allowing a greater use of cleaning options. - Page 3 Please store this instruction for future use. -Do not allow children to play with vacuum cleaners alone. -This appliance is only for home use. Do not use it outdoors. -When unplugging the charger, please hold the plug and do not pull the power cord. -The following objects are strictly prohibited, otherwise, it will damage the vacuum cleaner or cause fire and cause harm to your body: -Do not suck large or sharp objects, such as glass, etc.
-
Page 4: Description Of The Device
Indicates to read and review instructions to understand operation and use of product. Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if the warning included with this symbol is ignored. Take care to avoid contact with hot surface. Always use hand protection to avoid burns. For indoor and household use only. - Page 5 USAGE AND FUNCTION: Operating the Machine Notes: Do not use this product when charging. Please always check whether there are foreign matters in the flat suction. If there are foreign matters, your floor may be scratched. Insert the 2in1 tool into the host machine to clean the table, the interior of the car, corners, etc.
-
Page 6: Cleaning Your Machine
CLEANING YOUR MACHINE Please drop off the dust in the bucket and clean the steel mesh filter and sponge. 1.Press the ash dumping button to 2.Remove the filter. dump the garbage in the dust bin. steel mesh 3.Clean the dust bucket. Rinse 4.Put the sponge and filter steel mesh... - Page 7 5. Fasten the bottom cover of dust 6.Ready for work cylinder upward. steel mesh filter and , sponge and dust buckets are Important: Make sure the completely dry before you install them. stop working and the green light goes off When the item is Remove the floor brush and press the lock button to remove the roller brush Cut off the hair on the roller brush with scissors and remove it...
-
Page 8: Technical Data
DEAL WITH WASTE BATTERIES When discarding the device, remove the battery from the device first. Don't mix waste batteries with daily garbage Put them together; The battery should be sent to the local authoritative recycling center. If you can't remove the battery yourself, the local recycling center will help you remove it. -
Page 9: Limited Warranty
THE WARRANTY SHOULD BE ONLY / DIRECTLY THROUGH THE THIRD- PARTY SUPPLIERS FROM WHICH YOU PURCHASED THE PRODUCT. What is covered by this warranty? 1. The original unit and/or non-wearable parts deemed defective, in TurboTronic ® sole discretion, will be repaired or replaced ®... - Page 10 ® 5. Defects caused by repair persons not authorized by TurboTronic . These defects include damages caused in the process of shipping, altering, or repairing ® the TurboTronic product (or any of its parts) when the repair is performed by a ®...
Need help?
Do you have a question about the LASER STICK VACUUM and is the answer not in the manual?
Questions and answers