Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eastwood TIG 200 DC WELDER
Summary of Contents for Eastwood TIG 200 DC WELDER
- Page 1 Part #14100 TIG 200 DC WELDER ASSEMBLY & OPERATING INSTRUCTIONS...
-
Page 2: Specifications
STATEMENT OF LIMITED WARRANTY The Eastwood Company (hereinafter “Eastwood”) warrants to the end user (purchaser) of all new welding and cutting equipment (collectively called the “products”) that it will be free of defects in workmanship and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations. -
Page 3: Duty Cycle
DUTY CYCLE The rated Duty cycle refers to the amount of welding that can be done within an amount of time. The Eastwood TIG 200 DC has a duty cycle of 60% at 150 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. -
Page 4: Magnetic Fields Can Affect Pacemakers
Anyone with a pacemaker should consult their physican prior to performing any electric welding operations. NOTICE! Do not touch the electrode with the unit turned “ON”. Turn the unit “OFF” and unplug from power source before changing electrodes and collet parts, or cleaning the nozzle. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... -
Page 5: Required Items
REQUIRED ITEMS Before you begin using the Eastwood TIG 200 DC, make sure you have the following: • A properly grounded 110-120 VAC 50/60 Hz. 20 Amp Circuit or a 220-240 VAC 50/60 Hz. 30-50 Amp Circuit. • NOTE: Unit must be grounded to work properly and safely! •... -
Page 6: Components And Controls
1/16” ER308/308L 1/16” 1/4 - 3/8” Stainless Steel 1/8” 85-140 Gray, Red, White, Purple 1/16” ER308/308L 3/32” 1/4 - 3/8” Stainless Steel 3/16” 125-200 Gray, Red, White, Purple 3/32” ER308/308L 1/8” 1/4 - 3/8” Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... -
Page 7: Shielding Gas Connection
Welding Supply Stores. Eastwood recommends the use of 100% Argon shielding gas when TIG welding Steel and Stainless Steel. 1. Place the Eastwood TIG 200 DC in its dedicated area or on a welding cart. 2. Secure your Shielding Gas Bottle to a stationary object or mount to your welding cart if it is equipped to hold one so that the cylinder cannot fall over. -
Page 8: Preparing To Weld
5. The ideal tip will have the length of the conical portion of the sharpened area at 2-1/2 times the Tungsten rod diameter (Fig I). 6. Replace the Tungsten in the Collet with the tip extending 1/8”-1/4” beyond the Gas Cup, then re-tighten the Back Cap. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... - Page 9 6. When fi nished welding remember to close the gas valve on the bottle. To order parts and supplies: 800.345.1178 >> eastwood.com...
-
Page 10: Important Note
These instructions are intended only to provide the user with some familiarity of 90° the Eastwood TIG 200 DC. TIG welding is a highly complex procedure with many variables. If you have no experience with TIG welding; it is extremely important... -
Page 11: Troubleshooting
TROUBLESHOOTING To order parts and supplies: 800.345.1178 >> eastwood.com To order parts and supplies: 800.345.1178 >> eastwood.com... - Page 12 TROUBLESHOOTING Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
-
Page 13: Replacement Items
• #19079S – Stainless Steel Brush • #12762 – L, XL, XXL Welding Jacket • #21524 – TIG Welding Basics DVD by Ron Covell • #11616 – TIG 200 Welding Cart • #14106 – Welding Table To order parts and supplies: 800.345.1178 >> eastwood.com... - Page 14 NOTES Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
- Page 15 NOTES To order parts and supplies: 800.345.1178 >> eastwood.com...
- Page 16 If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178 Outside US: 610.718.8335 Fax: 610.323.6268...
Need help?
Do you have a question about the TIG 200 DC WELDER and is the answer not in the manual?
Questions and answers