Operation; Switching On/Off; Display Settings; Customizing Settings - ADX FIRESIGHT 30HC200 Instruction Manual

Operation

Switching On/Off

Press the control stick to switch on the unit. The display will show the ADX logo.
•
• Press the control stick again to switch off the unit.
• Unplug the mains plug and adapter from the mains socket to switch off the unit
completely.

Display Settings

1. Slide the control stick to the right to enter submenu / menu, or confirm your selection.
2. Slide the control stick upwards to enter Contextual Mode menu.
3. Slide the control stick to the left to return to the previous menu, or select the input
source.
4. Slide the control stick downwards to enter Game Crosshair Mode Settings menu.
The unit will show No Signal, and then Enter Sleep Mode if no input source is
detected. Then the unit will enter Sleep mode.

Customizing Settings

Contextual Mode Settings

1. Slide upward the control stick to enter the
Contextual menu.
2. Slide the control stick upward/downward to
select Movie / Reading / Night Mode.

Game Crosshair Mode Settings

1. Slide downward the control stick to enter the
Contextual menu.
2. Slide the control stick upward/downward to
select your desired setting, and then slide the
control stick to the right to confirm.
You may reconfigure the Hotkey1-3 Setting in the OSD Settings menu.
The default setting of the Hotkeys are as below:
• Hotkey1 (left): Enter the Input Source menu.
• Hotkey2 (up): Enter the Contextual Mode menu.
• Hotkey3 (down): Enter the Game Crosshair Mode menu.
15