Safety Warnings mount bracket when attaching the monitor to • Read all the instructions carefully before using the bracket. See your monitor instructions for the unit and keep them for future reference. screw type. • Retain the manual. If you pass the unit onto a •...
Page 4
other devices or moving the unit. is that displaying the same image for a long time may cause a permanent after-image to • Unplug the unit from the mains socket during remain on the screen. This is called screen a lightning storm and long inactivity periods burn.
Thank you for purchasing your new product. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.
Product Overview Front View 3 4 5 6 7 1. Screen Display Down Button 2. Indicator Up Button • Light up Blue while power on. 6. E Button • Flash in blue if no video source or Press to enter input source menu. voltage is low.
Connections HDMI Connection Use the HDMI cable (not included) to connect the HDMI1 or HDMI2 socket of the unit to the HDMI OUT socket of your PC (not included). HDMI 2 HDMI 1 AUDIO HDMI Cable (not included) PC (not included) DP Cable Connection Use the DP cable to connect the DP socket of the unit to the DP OUT socket of your PC (not included).
AUDIO Connection Use an audio cable (not included) to connect the AUDIO socket of the main unit and an AUDIO IN socket of an audio device (e.g. speaker; not included). HDMI 2 HDMI 1 AUDIO Audio device (not included) Audio Cable (not included) Using Earphones Turn down the volume from the source input before using the earphones (not included).
Connecting to the Mains Supply 1. This unit operates with a mains adapter (included). 2. Connecting the unit to any other power source may damage to the unit. Unwind the mains adapter to its full length. Connect the end of the cable to the DC socket of the unit and then connect the mains adapter to the mains socket.
Installation Assembling with the Base Stand 1. After unpacking, take out the unit with the foam. Gently place it on a flat surface. 2. Detach the back cover from the unit. 3. Secure the stand and the base with the provided screws. Install the back cover onto the stand assembly.
Page 11
4. Install the stand with the monitor unit. 5. Stand the main unit in upright position. During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.
Adjusting angle You may adjust the angle of the screen for a comfortable viewing experience. The angle of the screen can be adjusted forwards or backwards from -10° to 5°. -10° 5° Do not touch or press the screen area when adjusting the angle and the height of the monitor.
Wall Mounting 1. Detach the back cover from the main unit. 2. Tighten the VESA connector (UP) and VESA connector (DOWN) onto the rear of the main unit with the 4 provided M4 screws.
Page 14
3. Install the unit onto the wall with the mount stud (not included), and then mount it onto the wall. Wall Stud (not included) VESA Connector (Up) Screw Washer VESA Connector (Down) The mounting hole distance of the mount for the unit is 75 × 75 mm. •...
Operation Switching On/Off Press and hold Power button to switch on the unit. The display will show the ADX • logo. • Press and hold Power button again to switch off the unit. • Unplug the mains adapter from the mains socket to switch off the unit completely.
Page 16
Game Settings Standard Mode Off/On RTS/RPG Mode Off/On FPS Arena Mode Off/On MOBA Arena Mode Off/On Adaptive-Sync Off/On Shadow Balance 0-100 Response Time Off/Normal/Fast/Ultrafast Refresh Rate Off/On Game Crosshair Off/On Game Time Off/On Dynamic Brightness Off/Normal/Expert/Elaboration Virtual Response Time Off/On Ambient Lighting Off/On Picture Settings...
Maintenance Cleaning the Unit Ensure the unit is fully unplugged from the mains socket before cleaning. • Use a soft dry cloth to wipe away the dust from the screen and surfaces. • If the surfaces are extremely dirty, clean the monitor with a cloth which has been dipped in a slightly soapy water.
Specifications Brand Model A27G6G23 Energy Efficiency Class 68.58 / 27 Screen diagonal (cm / inches) 28W (TYP) Power Consumption 19 kWh/1000h Average Energy Consumption <0.5 W Standby Power Consumption 300 cd/m Brightness 16:9 Aspect Ratio 1920 × 1080 Screen Resolution (Horizontal ×...
Page 20
On mode power demand in Standard Dynamic Range (SDR) 18.8 W 0.1 W Off mode, power demand, if applicable 0.1 W Standby mode power demand, if applicable Monitor Electronic display category 20.1 dm Visible screen area Panel technology used Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market) (Years) Minimum guaranteed availability of spare parts (from the...
Page 22
Currys.co.uk All the support you need. Whether it’s a tech emergency or you need plain good advice, we’re always on hand to help. UK: 0344 5611234 IRE: 1 890 818 575 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day.
Need help?
Do you have a question about the FIRESIGHT 27HC180 and is the answer not in the manual?
Questions and answers