6. Push the cardboard stands (part F) onto the board to make your butterfly art stand up for presentation. Activate your butterfly board
and witness the mesmerizing light display.
QUESTION AND COMMENTS
We treasure you as a customer and your satisfaction with this product is important to us. In case you have any comments or questions, or
you find any parts of this kit missing or defective, please do not hesitate to contact our distributor in your country, whose address is
printed on the package. You are also welcome to contact our marketing support team at Email: infodesk@4M-IND.com, Fax (852)
25911566, Tel (852) 28936241, Web site: WWW.4M-IND.COM
©2023 4M INDUSTRIAL DEVELOPMENT LIMITED. ALL RIGHTS RESERVED.
3D GLOW
PLEASE SCAN THE QR CODE TO VIEW MULTI-LANGUAGE INSTRUCTIONS
BUTTERFLY
CANVAS
A. SAFETY MESSAGES
1. Adult supervision and assistance are required at all times.2. This kit is intended for children 5 years or older.3. This kit and its finished
product contain small parts which may cause choking if misused. Keep away from children under 3 years old. 4. To prevent possible short
circuits, never touch the contacts inside the battery case with any metal.5. Only install batteries under adult supervision. 6. Please read
through all the instructions and keep them since they contain important information.
B. USE OF BATTERIES:
1. Requires two 1.5V AA batteries (not included).2. For best results, always use fresh batteries.3. Make sure you insert the batteries with
the correct polarities.4. Remove the batteries from the kit when not in use.5. Replace exhausted batteries straight away to avoid possible
damage to the kit.6. Rechargeable batteries must be removed from the kit before recharging.7. Rechargeable batteries must be
recharged under adult supervision.8. Make sure that the supply terminals in the battery case are not short circuited.9. Do not attempt to
recharge non-rechargeable batteries.10. Do not mix old and new batteries.11. Do not mix alkaline, standard (carbon-zinc), or
rechargeable batteries.
C. CONTENTS
Part A: Butterfly template x 2, Part B: Butterfly board, Part C: String lights with 9 light bulbs, Part D: Battery case cover with screw, Part E:
Adapter and peg x 9, Part F: Stand x 2, Part G: Adhesive foams. Also required but not included in the kit: 2 x 1.5V AA batteries, a small
crosshead screwdriver.
D. INSTRUCTIONS
1. Insert two 1.5V AA batteries into the battery case of the light string. Secure the battery case cover with a screw (part D). Turn on the
light string and identify the colour of each LED light bulb.
WARNING:
CHOKING HAZARD - Small parts.
Not for children under 3 years.
Need help?
Do you have a question about the KidzMaker 00-04796 and is the answer not in the manual?
Questions and answers