BEFORE YOU START Before you use the E-Scooter for the rst time, please read the USER MANUAL thoroughly and follow the instructions and warnings to ensure your own safety and the safety of others. It is recommended to keep the instruction manual for future reference.
34. At higher speeds, always take into consideration longer stopping distances. 35. Do not attempt to jump on or o your scooter while driving. 36. Do not use for o -road driving. 37. Do not exceed the maximum weight limit (120 kg). 38.
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY Step 1: Getting started – Take your scooter out of the box and place it at on the oor. Step 2: Charging your scooter – Make sure the scooter is fully charged before your initial use. For charging instructions, please follow details under the battery and charging speci cations.
FOLDING Push the safety pin upwards to Pull the folding lock outwards Gently bring the steering open the folding lock. to fold the e-scooter. column down. Click the folding grip onto the rear fender hook. UNFOLDING Push the folding grip down and gently bring the steering column all the way up. Push the folding lock towards the steering column to lock it.
CARRYING THE E-SCOOTER Pick up the e-scooter gently to avoid putting too much load on the rear fender. Position hand here when carrying Avoid lifting e-scooter here DISPLAY 1. Speed Shows the current speed you are traveling at. 2. Riding mode Change between di erent driving styles.
OPERATING PRINCIPLES START The E-scooter comes with a security lock that you need to unlock before you can use the E-scooter. Press and hold the display button for 2 seconds to turn the scooter ON. To unlock the E-Scooter press and hold down the accelerator. The display will show “16”. While holding down the accelerator, press down the brake handle.
SPEED LIMITS Maximum speed: 25 kmh. OPERATING RANGE Please note that the scooter can travel 22 km on a fully charged battery in ideal conditions. The following are some of the major factors that will a ect the operating range of the scooter. Terrain: A smooth at surface will increase your riding distance, whereas riding uphill or on rough or uneven terrain will reduce your distance signi cantly.
CHARGING YOUR SCOOTER Step 1: Ensure that the charging port is clean and dry. Step 2: Plug the charger into a power outlet, then connect the cable with the power supply (100V ~ 240V; 50,60 Hz), make sure the light on the charger is lit GREEN. Step 3: Connect the charging cable to the charging port of the scooter.
Note: If a fault or damage occurs in the scooter, you must immediately stop using the product and contact after-sales support for assistance. Any further damage or fault that occurs because of the use of a damaged product will nullify the warranty.
ADJUSTING THE FOLDING MECHANISM Use the supplied hex-keys to tighten the 3 screws around the folding mechanism when needed. CLEANING YOUR SCOOTER Disconnect the charger and turn o your scooter. Avoid using water or other liquids and cleaners on the scooter while cleaning. Wet a clean cloth with clean soapy water, wring out the cloth thoroughly, and wipe the body of the scooter.
SYMBOL EXPLANATION Declaration of Conformity: (See provided document). Products marked with this symbol comply with all applicable community regulations of the European Economic Area Noise level does not exceed 70 dB For indoor use only. This unit is double insulated. Wear personal protective equipment.
Need help?
Do you have a question about the V9 and is the answer not in the manual?
Questions and answers