Related Manuals for RITZ RTZ3408
Summary of Contents for RITZ RTZ3408
- Page 1 USER INSTRUCTION MANUAL ANCHORAGE WIRE ROPE SLINGS THIS INSTRUCTION MANUAL APPLIES TO THE FOLLOWING MODEL: RTZ3408(6) BKLRT 19-01...
-
Page 2: Product Description
If you are uncertain about the safe operation of this equipment in any environment, contact Ritz Fall Protection for further instructions. Do not use the equipment near sharp edges, abrasive surfaces and looping around small diameter structural Ÿ... - Page 3 Capacity: Ritz Fall Protection Anchorage Wire Rope Slings are designed for use by single user with a combined weight (clothing, tools, etc.) of no more than 310 lbs.(140 kg) Make sure all of the components in your system are rated to a capacity appropriate to your application.
- Page 4 Free fall greater than 6 ft. (1.8 m), and up to a maximum of 12 ft. (3.7 m) is possible, Ritz Fall Protection recommends using a personal fall arrest system incorporating a Ritz Fall Protection Energy Absorbing Lanyard.
- Page 5 10. SPECIFIC INSTRUCTIONS: Ritz Fall Protection Anchors are designed to provide complete attachment system to user in the event of a fall. These attachment systems must be connected to the proper body support and connecting facility. These Anchors are meant to hold the victim of fall till the rescue operation is performed, so this is important that the whole system must have the all the essential components before going for the use.
- Page 6 These Anchor wire rope slings are made up of galvanized wire rope and are PVC coated . The termination of the wire rope comes with various combinations that is both side loop (FAP 3405), one side loop and other side O-ring (FAP 3406), one side O-ring and other side snap hook (FAP 3407) and both side O-rings (RTZ3408) Note: The slings must be placed over the anchorage structure in such a way that both the termination ends must hang Ÿ...
-
Page 7: System Requirements
Check also that the markings are legible. 18. SYSTEM REQUIREMENTS: Compatibility of Components: Ritz Fall Protection Fall Protection equipment is designed to be used with Ritz Ÿ Fall Protection approved components. Please contact Ritz Fall Protection if you have a question regarding compatibility. - Page 8 Maintenance and Cleaning: Repairs to equipment can be made only by a Ritz Fall Protection representative Ÿ or person or entity authorized by Ritz Fall Protection. Contact Ritz Fall Protection for maintenance and repair. Cleaning after use is important for maintaining the safety and life of the equipment. Cleanse the equipment of all dirt, corrosives, and contaminants.
- Page 9 20. HOW TO DISPOSE A LANYARD: When the lanyard becomes unts or in case of any wear and tear, dispose the lanyard immediately. Steps for Disposing Wire Rope Lanyards:- Segregate the equipment in two different crates for placing components namely Metal and PVC of the wire Ÿ...
- Page 12 WARRANTY: All Ritz Fall Protection products bear 1 year warranty against manufacturing defects, applicable on Unused Ritz Fall Protection products, from the date of purchase. However, Ritz Fall Protection shall not be liable for any accident or damage while the product is in use.
Need help?
Do you have a question about the RTZ3408 and is the answer not in the manual?
Questions and answers