Related Manuals for RITZ RTZ6756RS
Summary of Contents for RITZ RTZ6756RS
- Page 1 USER INSTRUCTION MANUAL WORK POSITIONING DEVICES THIS INSTRUCTION MANUAL APPLIES TO THE FOLLOWING MODELS: RTZ6756RS, RTZ30796 ANSI Z 359.3-2017 and OSHA 1926 BKLRT 11-02...
-
Page 2: Table Of Contents
If you have questions on the use, care, or suitability of this equipment for your application, contact Ritz Fall Protection. Before using this equipment, record the product identification information from the ID label into the inspection and maintenance log in section 7 of this manual. - Page 3 If you are uncertain about the safe operation of this equipment in any environment, contact Ritz Fall Protection for further instructions. Do not use the equipment near sharp edges, abrasive surfaces and looping around small diameter structural members.
-
Page 4: Description
Ritz Fall Protection Lanyards should be used only with the combinations of components, sub-systems or both which may affect or interfere with the safe function of one another. Be certain that connecting devices are compatible and that other elements of the PFAS are safe to use and compatible before use. -
Page 5: System Requirements
Ensure all connections are fully closed and locked. Ritz Fall Protection connectors (snap hooks and karabiners) are designed to be used only as specified in each product's user's instructions. See Figure 4 for inappropriate connections. Ritz Fall Protection snap hooks and karabiners should not be connected: To a D-ring to which another connector is attached. - Page 6 Ÿ section 1.2 for more information. Body Support: Ritz Fall Protection recommends the use of a full body harness equipped with side D-rings with this equipment. A Ÿ body belt may be used when it is a part of a full body harness.
-
Page 7: Inspection
Connecting the Rebar Lanyard to your body support and Anchorage: Figure 6 - Connecting to the Anchorage Connecting to your body support: See Figure 5. Double Leg Rebar Lanyards: Connect one leg of the rebar lanyard to each side D-ring of your Ÿ... -
Page 8: Labels
An excessive build-up of dirt, paint, etc., may prevent the rebar lanyard from working properly, and in severe cases, weaken the webbing. If you have questions about the condition of your rebar lanyard, contact Ritz Fall Protection. - Page 9 SPECIFICATIONS : Materials: Snap Hooks, Karabiners, D-rings, Swivel : Steel alloy, zinc plated. Ÿ Webbing : Polyester. Ÿ Chain : Steel alloy, 5/0 twist link, zinc plated. Ÿ Rope : Polyamide Ÿ Strength and Capacity: Snap Hooks, Karabiners, D-rings, O-ring : 5,000 lbs. tensile strength, 310 lbs. capacity. Ÿ...
- Page 11 WARRANTY: All Ritz Fall Protection products bear 1- year warranty against manufacturing defects, applicable to unused Ritz Fall Protection products, from the date of purchase. However, Ritz Fall Protection shall not be liable for any accident or damage while the product is in use.
Need help?
Do you have a question about the RTZ6756RS and is the answer not in the manual?
Questions and answers