HWM RadarSens User Manual page 6

Installation of Equipment:
Installation Accessories, including brackets for mounting the unit, are available to suit most installation situations.
Examples are shown below.
For safe and secure installation, adhere to the safety warnings (section 6) and always use bracket solutions if required
from HWM when installing RadarSens.
For additional guidance of installation of RadarSens, refer to the RadarSens User Guide (Part 1 of 2), document MAN-
170-0001.
RadarSens is installed in conjunction with a compatible HWM logger device. Refer to the related documentation for
the logger, including the user guide and safety supplement. Follow the instructions and warnings contained within
each of the user guides and the product labelling during installation and maintenance of the equipment.
Connection and Commissioning:
Whilst adhering to the safety measures within this document, connect the equipment and commission the RadarSens
as described in the RadarSens user guide.
Safety of Operation:
Once installed, the unit has been certified to the appropriate standards for continuous operation without user
intervention.
Maintenance:
The RadarSens may be cleaned as a maintenance task. Adhere to the safety warnings (section 6) and within the
documentation and labelling when performing any maintenance.
The RadarSens has no internal serviceable parts. Do not attempt to disassemble the unit.
6: Warnings
•
DO NOT OPEN WHEN EXPLOSIVE ATMOSPHERE IS PRESENT.
•
POTENTIAL ELECTROSTATIC CHARGING HAZARD. DO NOT RUB WITH A DRY CLOTH.
WHEN CLEANING, USE A DAMP CLOTH THAT CAN HAVE A MILD CLEANING SOLUTION.
•
TAKE STEPS TO MINIMISE BUILD UP OF ELECTROSTATIC CHARGES, SUCH AS INSTALLING
RADARSENS IN A LOCATION PROTECTED FROM DIRECT AIRFLOW.
•
THE UNIT MUST BE INSTALLED IN A SUITABLE LOCATION. CONSIDERATION MUST BE GIVEN TO LOW
HUMIDITY SITES TO AVOID THE GENERATION OF STATIC ELECTRICITY. ADDITIONAL PROTECTION
MEASURES MAY BE REQUIRED.
•
WHEN MAKING A RISK ASSESSMENT, CONSIDER ANY STEPS REQUIRED TO PREVENT ELECTROSTATIC
DISCHARGE TO RADARSENS OR SURROUNDING EQUIPMENT DURING INSTALLATION.
•
DURING INSTALLATION, USE INSULATED TOOLS AND EQUIPMENT, TO PREVENT ELECTROSTATIC
DISCHARGE.
Warnings:
Page 6 of 7
MANEX-170-0001-A (RadarSens Safety Supplement)