Page 1
Temperature limits UKEx certification number Name of manufacturer, address & website Approvals Marking Label: Markings CE mark and certified body number UKCA mark and certified body number Warning markings Entity Parameters Label: Page 1 of 7 MANEX-170-0001-A (RadarSens Safety Supplement)
Page 2
Part Number scheme and nomenclature. 4: Connection and Entity Parameters When used in a potentially explosive environment, RadarSens must be connected to HWM intrinsically safe data loggers only; do not connect to any other type of logger. Use only with the following type of intrinsically safe HWM logger: ISLog.
Page 3
Page 3 of 7 MANEX-170-0001-A (RadarSens Safety Supplement)
5: Installation and Maintenance Page 4 of 7 MANEX-170-0001-A (RadarSens Safety Supplement)
Page 5
Check the port parameters of the relevant logger interface and the equipment to be attached. Confirm they are suitable for interconnection. • Check the equipment includes a suitable cable with connector attached for interconnecting RadarSens to the logger interface. A water-tight connection is required. Page 5 of 7...
Page 6
For safe and secure installation, adhere to the safety warnings (section 6) and always use bracket solutions if required from HWM when installing RadarSens. For additional guidance of installation of RadarSens, refer to the RadarSens User Guide (Part 1 of 2), document MAN- 170-0001.
Need help?
Do you have a question about the RadarSens and is the answer not in the manual?
Questions and answers