THOMSON VS 470 User Manual page 9

01_VS470_en 24/08/04
If you have several equipment items (VCR player, satellite receiver, DVD player, etc.) in your main
equipment room and want to transmit and receive audio and video signals to a second TV set,
connect your equipment items as shown in the Diagrams on following pages. Usually, the units are
connected in series, the last unit having a free scart connection that you can use for the
connection of the transmitter.
! These diagrams represent some connection possibilities the operation of which depends on the type of
unit, its sockets and the signals it produces.There exist other connections that you might perhaps wish
to try if diagrams 1 to 3 here are not satisfactory. If this is the case, ask your dealer for assistance.
! As a general rule, remember to switch off units not in use. Also, refer to the manufacturers' instructions
to see if there are any particularities regarding connection or use. Certain units may need to have their
input scart connection "programmed".
! In all cases the transmitter must be connected to a scart connection that produces an Audio-Video signal
Out. Refer to the manufacturer's instructions for confirmation of this.
10:34 Page 9
Relay of pictures from several units
9
EN
EN