Set-Up Features; Ccc Ce Cece Eee; Ten Chie Beesaoeeen; 4D Ae Irae Open Ceesd - Panasonic CT-1386YWD Operating Instructions Manual

Set-Up Features
Set Time
Clock (when set) will display on screen at initial "Turn On",
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Program ON/OFF Timer.
NOTE: This feature will be disabled when Auto Power
On is activated.
1. Press ACTION button on the TV or Remote (some
models).
2. Press / WV buttonor @ / © buttontohightight
the Set-Up Icon.
3. Press ACTION button to display the Set-Up Menu.
NOTE: For Models CT-1386Y, CT-1386YW, and
CT-2086Y ANT, AUTO PROG, and MANUAL
PROG, will not be displayed in the Set-Up
menus.
4. Press </> button to set hours (set AM/PM
accordingly).
5. Press V button to select minutes position.
6. Press </> button repeatedly to set minutes.
7. Press ACTION button twice to exit menus.
Antenna (Ant) for CT-1386VY & CT-2086VY
The proper Input mode must be selected for the type of
signal at the antenna input.
e TV mode is used when the Monitor is not connected toa
cable TV system, for example when using a VHF/UHF
antenna (channels 02 — 69).
e Cable mode is used when the Monitor is connected to a
Cable TV system and you are not using a cable
company converter box (channels 01 — 125).
1. Press ACTION button on the TV or Remote (some
models).
2. Press & /V button or </> button tohightight
the Set-Up Icon.
3. Press ACTION button to display the Set-Up Menu.
SSETZUR,
4. Press V button to highlight ANT.
5. Press 4 / > button to select TV or CABLE.
6. Press ACTION button twice to exit menus.
Auto Prog for CT-1386VY & CT-2086VY
This feature allows you to place ail channels with a video
signal into Channel Scan Memory.
1. Press ACTION button on the TV or Remote (some.
models).
2. Press & /¥V button or 4 /> button to highlight
the Set-Up Icon.
3. Press ACTION button to display the Set-Up Menu.
oA
AUTOPROG
"MANUAL PR
Press V button to highlight AUTO PROG.
Press </> button to start Auto Programming.
Channels will automatically advance until all channels
have been scanned.
6. Press ACTION button twice after completion of Auto
Programming to exit menus.
NOTE: Channel numbers with signal present will turn blue
which indicates stored in Channel Scan Memory.
-16-