Footswitch - Valeton GP-200LT User Manual

Global Settings
Using GP-200LT as an audio interface
When used as a USB audio interface, the GP-200LT will be recognized by the system as a 6-in/4-out USB device. Here we will
show you how to use this function through listing two scenarios.
Scene 1: Using the built-in re-amp function in the DAW to record or adjust the tone
1. Set the Mono L and Mono R's output to "Dry" in the Global Settings-USB Audio
2. In the DAW, create two new Tracks A and B, and import/record a dry guitar Track in A
3. Set Track A output to Output 3-4, set Track B input to Input 3-4, keep Track B's monitoring o
4. Play the dry track in DAW, and now you can hear the e ect sound of the processed dry track file in GP-200LT
5. Activate "Record" in Track B on the recording software, then you'll get to record the Track with e ect after re-amp on Track B.
Scene 2: Using LOOPBACK function to record, combining the audio from multiple sources on your computer
1. In the DAW, create a new stereo audio track
2. Set the input to Input 5-6
3. Start recording in the DAW
4. By playing other audio sources on your computer, you can record them in the track now

Footswitch

This is for choosing footswitch modes and corresponding function settings.
GLOBAL
SETTINGS
Input/Output
Footswitch
EXP 2/Footswitch
Display
Bank
Sel Mode
Setting
Wait
Footswitch
Patch Stomp
FS 1 FS 2
Tap
PATCH- PATCH+
Hold
PATCH- PATCH+
FS
1+2 FS 2+3
Tap
BANK LOOPER
Footswitch
Patch Stomp
FS 1 FS 2
Tap
PATCH- PATCH+
Hold
PATCH- PATCH+
FS
1+2 FS 2+3
Tap
BANK LOOPER
Tap BANK- Hold BANK-
Ÿ Quick Access Knob 1 is to choose Bank Select Mode. This setting
simultaneously a ect internal and external footswitches and o ers
USB Audio
two modes: Initial and Wait.
EXP Calibrate
◦ Initial: When switching banks, the patches will roll immediately.
◦ Wait: The default mode. When switching banks, the patches will
NOT roll immediately, instead, you will need to enable footswitch
Auto CAB Match
functions and select a confirmed patch number. After that, the
patches will switch.
Ÿ Quick Access Knob 2 is to enter Footswitch Setting (See picture
below).
There are 3 footswitch modes: Patch mode, Stomp mode and User
User
mode. In each mode, all options are the same with varied default
FS 3 FS 4
settings. All functions will work immediately when selected and
TAP
None
TUNER
presented. All changes will be saved automatically.
FS 3+4
You can also click PARA to enter Footswitch Setting, and assign tap
MIDI
and hold functions for each footswitch. By fast-selecting which
footswitch to assign functions, tap the corresponding footswitch.
Reset FS Settings
User
FS 3 FS 4
Ÿ Turn Quick Access Knob 1 to select tap functions
TAP
None
TUNER
Ÿ Turn Quick Access Knob 2 to select hold functions
FS 3+4
Ÿ Turn Quick Access Knob 3 to perform a factory reset for this mode
MIDI
Reset FS Settings
12