Table of Contents
Advertisement
IFC228-LCD-DVD_EN
1/04/05
Advanced functions
EN
Return
Activate parental control
Parental control settings
Press à or ¨ to enter password and activate the
parental control.
Return
Programme
Programme lock
Lock front panel
To lock or unlock the selected programme,
press à or ¨.
16:20
Page 16
Parental control
The parental control functions allow you to limit your children's access to the television.
You can do this by locking the buttons on your TV set, thereby barring access to certain
channels and/or AV programmes.These functions are protected using a PIN code.
1.
Display the
control
2.
If the parental control function is not on, follow the instructions on the screen to
Ð Ð
access the menu.
If it is on, the
¨ ...
screen the numbers are replaced with asterisks.The
...
appears.
Locking a channel or AV programme
1.
Select the
and press
2.
Under the
01 TF1
¨ þ
to select the channel to be locked. Use the
þ
access the AV programmes.
Note: Only the AV1, AV2 and AV3 (depending on model) programmes can be locked.
3.
Check the
4.
Select the
5.
If the parental control is already on, press
if it is not on, select the
Activ.
menu appears. Enter a 4-digit code, then enter it again to confirm it. Press
EXIT
to close the menu.
To unlock the channel or AV programme, go to the
your code, select the
Programme lock
the menu.
Locking the buttons on the TV set
1.
Select the
and press
2.
Select the
3.
Select the
4.
If the parental control is already on, press
If it is not on, select the
Activ.
menu appears. Enter a 4-digit code, then enter it again to confirm it.A message
appears saying that the parental control is on. Press
Note: The remote control is needed to be able to use the television.
To cancel the lock, go to the
Parental control settings
option and uncheck the box by pressing
Operation (TV mode)
-
To watch a channel or AV programme which is locked, try accessing it and follow the
procedure on the screen.The lock will be applied again when you put the television in
standby.
In the list of programmes, channels and/or AV programmes which are temporarily
unlocked are indicated by an open green padlock.
-
The parental control function must be enabled without fail in order to be able to apply
a lock.To do this you need to select the
Parental control
the
-
Whenever you enable the parental control function by defining a personal code you
have to enter your code to access the
even if there is no lock on.
OVERVIEW
menu by pressing the
OK
option and press
to confirm.
Pwd
menu appears. Enter your 4-digit code to access the menu. On the
Parental Control Settings
OK
.The relevant menu appears.
Programme
option use the
Programme Lock
box by pressing
Return
option and press
OK
to return to the
EXIT
Activate parental control
Parental control settings
option and uncheck the box by pressing
Parental control settings
option from the
OK
.
Lock front panel
option and check the box by pressing
Return
OK
option and press
to go back to
EXIT
Activate parental control
Parental control
option and press
OK
. Press
Activate parental control
menu to define a personal code.
Parental control
16
MENU
Parental
button. Select the
Parental control
menu
Parental control
option from the
PR+/PR-
buttons, numeric or
AV
buttons or press the
button to
OK
.
Parental control
to close the menu.
OK
option and press
Parental control
menu by entering
OK
option and press
. Select the
OK
EXIT
. Press
Parental control
OK
.
Parental Control
to close the menu.
OK
option and press
EXIT
to close the menu.
menu by entering your code, select the
OK
Lock front panel
. Select the
EXIT
to close the menu.
option from
Installation
and
menu
buttons
menu.
.The
to close
menu
menu.
. The
menus,
Advertisement
Table of Contents
