3.2 AC Main Adapter (not included)
You can connect the set to the mains using a mains adapter.
Only use a mains adapter, which supplies 4.5V DC with the negative
pole at the center pin of the plug .
Before connecting the mains adapter
Check that the mains voltage indicated on the type plate of
•
the adapter matches your local mains voltage.
If the mains adapter equipped with a voltage selector, set this
•
to the local voltage.
Connect the mains adapter to the DC 4.5V socket of the set
•
and to the wall socket.
3.3 Power failure
If the power supply is interrupted, the programmed time
•
settings and preset radio stations will be kept in the memory
for 10 min. or more.
If the AC power is disconnected from the 4.5 DC socket, the
•
batteries (if present) will take over the supply.
8