Subscribe to Our Youtube Channel
Related Manuals for Gazelle GC2030
Summary of Contents for Gazelle GC2030
- Page 1 GC2030 Cordless Brushless Driver/ Hammer Drill Pictures of battery packs with different configurations vary in the illustration.
- Page 2 Read through carefully and understand these instructions before use.
- Page 3 General power tool safety warnings moment of inattention while operating power tools WARNING Read all safety warnings, may result in serious personal injury. instructions, illustrations and specifications b)Use personal protective equipment. Always wear provided with this power tool.Failure to follow all eye protection.
- Page 4 tool’s operation. If damaged, have the power parts. This will ensure that the safety of the power tool repaired before use. Many accidents are tool is maintained. b)Never service damaged battery packs. Service caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly of battery packs should only be performed by the maintained cutting tools with sharp cutting edges manufacturer or authorized service providers..
-
Page 5: Technical Data
Return exhausted batteries to your reference. local collection or recycling point. q)Use the cell or battery only in the application for which it was intended. TECHNICAL DATA Model GC2030 Power Voltage Max. Chucking Capacity Max. Screw Dia. /min 1st gear No-load Speed... -
Page 6: Intended Use
INTENDED USE 1.Battery Pack This product is suitable for screwing in and out of Button screws under general environmental conditions, 2.Battery Pack and can also be used for drilling operations on wood, plastic, metal, walls, etc. GENERAL DESCRIPTIONS 2. Removing battery pack The battery pack is placed under the machine handle, press the battery pack button down in the direction of arrow, and then pull out the battery pack... - Page 7 the battery is near to be empty, the protective circuit actuates properly and returns to the “OFF” actuates to switch off the tool. position when released. Do not operate at low speed for a long time, ●Disposal of Battery otherwise the machine may be overheated. To protect natural resources, please recycle or 1.Switch Button dispose of batteries properly.
- Page 8 the speed selector when the machine is gears of torque switch sleeve to adjust the tightening running. Otherwise it may cause damage to the torque. The calibration and indicating arrow should be machine. aligned during adjustment. The smaller the number 3.
-
Page 9: Inspection And Maintenance
may be damaged. Please choose suitable torque according to your operational need. 1.Screw 2.Driver Bit ● Tighten screws Adjust mode switching sleeve to the position , ● Spindle Lock place the tip of the driver bit on the screw head and If the switch button is not pressed, the spindle is apply appropriate pressure to the machine. -
Page 10: Maintenance And Care
MAINTENANCE AND CARE ● Storage Please pull out the battery pack when it is not in use. Store and keep the battery away from other metal objects, such as paper clips, coins, keys, nails, screws or other small metal objects, so as to prevent one end of the battery pack from connecting with the other end. - Page 11 EXPLANATION OF GENERAL VIEW Hexagon Socket Head Washer Drill Chuck Lock Plate Torque Adjusting Cup Torque Pin Cross Recessed Countersunk Head Guide Roller Screw Stopper Plate Ring Torque Setting Audio Piece Output Disc Adjusting Nut Inner Gear Clutch Spring Satellite Gear Encircling Ring Washer Mode Switch Cup...
- Page 12 Quincunxes Fillister Head Screw LED Shade Pan Head Tapping Screw Reversing Switch Lever Control Panel Assembly Battery Socket Stator Right-Half Handle Driving Gear Ball Bearing Armature Bearing Shim Rear Cover...
Need help?
Do you have a question about the GC2030 and is the answer not in the manual?
Questions and answers