Optional Accessories - Makita RT001G Instruction Manual

D A1 A2
1/4" 26 8
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Accessories applicable to this trimmer
The tool can be used with the following accessories for a variety of purposes.
Some accessories are not available in your country.
► Fig.100
1. Trimmer base (metal)
Trimmer base (resin)
2.
Clear visibility of the cut.
Tilt base
3.
4. Offset base
5. Plunge base
6. Grip attachment
7. Templet guide
Straight guide
8.
9. Trimmer guide
10. Trimmer shoe
Enables accurate edge works. *Use with parts of
the trimmer guide.
11. Dust nozzle
12. Base plate (metal)
13. Square base plate (base plate of the tilt base)
14. Offset base plate (base plate of the offset base)
By using the offset base plate with the grip attach-
ment, grip can be attached.
15. Base plate (resin)
16. Grip base
17. Bar type grip
18. Knob type grip (grip of the plunge base)
19. Dust nozzle for the plunge base
20. Templet guide for the plunge base
21. Guide holder
This allows the straight guide for the trimmer base
to be used on the plunge base.
22. Parallel ruler
Fine adjustment function of positioning.
23. Parallel ruler
24. Guide rail adapter
25. Guide rail
L1 L2 L3 R1
42 12 4.5 3
Unit:mm
• Straight and groove forming bits
R2
• Edge forming bits
6
• Laminate trimming bits
• Straight guide assembly
• Trimmer guide assembly
• Trimmer base assembly
• Trimmer base assembly (resin)
• Tilt base assembly
• Plunge base assembly
• Offset base assembly
• Grip attachment
• Templet guide
• Collet cone
• Wrench 13
• Wrench 22
• Wireless unit
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
For accurate straight cutting.
26. Bevel guide
For angle adjustment of the guide rail.
27. Guide rail joint connector (2 pcs.)
For jointing two guide rails.
28. Clamp (standard type)
For fixation of the guide rail.
29. Clamp (quick type)
For fixation of the guide rail.
30. Seat
Repair parts of the guide rail for upper plastic tape.
31. Rubber seat
Repair parts of the guide rail for lower rubber tape.
32. Position seat
Repair parts of the guide rail for position seat.
► Fig.101
31 ENGLISH