Log In To The System With Passwordless Power-On Authentication - Lenovo ThinkPad L13 Gen 5 User Manual

a. Select the available FIDO2 USB device that you want to register in the Discovered Devices
field.
b. Click Yes in the displayed window to confirm the device you selected
c. If you set a power-on password, you are prompted to enter the correct password.
d. The User operation request window is displayed. You are prompted to press the button on
the connected FIDO2 USB device, and then follow the on-screen instructions to close the
window.
e. Press Esc to exit and restart your computer.
Notes:
• If you want to unregister your devices, click the available FIDO2 USB device that you want to unregister in
the My Device field and enter the correct power-on password for verification.
• If you use more than one FIDO2 USB device with a common identifier for registration, only one device is
available.

Log in to the System with Passwordless Power-On Authentication

Follow the instructions to log in to the System with Passwordless Power-On Authentication.
Step 1. Restart the computer.
Step 2. ThinkShield Passwordless Power-On Authentication window is displayed.
Step 3. Insert your registered FIDO2 USB device for detection.
Step 4. Then follow the on-screen instructions to press the button on your FIDO2 USB device for
verification.
Step 5. After your device is verified, the power-on process continues.
Note: You should insert the FIDO2 USB device or enter the power-on password within 60
seconds. Otherwise, your computer will shut down automatically.
38
ThinkPad L13 Gen 5,ThinkPad L13 2-in-1 Gen 5 and ThinkPad S2 Gen 9User Guide