iLive IHB227 - Home Theater System Manual

Also See for IHB227:

User manual (10 pages)

Table of Contents

Contents

1 Setup
2 Orientation
- 2.1 Controls & Inputs
- 2.2 Connect Speakers
3 Remote Control
- 3.1 Functions
- 3.2 Batteries
4 Connecting External Devices
- 4.1 Pairing Bluetooth and Playing Audio Wirelessly
- 4.2 Aux In
5 CD & Radio
6 Clock/Sleep Timer & Alarm
7 Safety Instructions & Warnings
- 7.1 Important Safety Instructions
- 7.2 Battery Warnings
8 Customer Support
- 8.1 Contact Information
- 8.2 International Support
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

iLive IHB227 - Home Theater System Manual

Setup

Features

Bluetooth wireless: range 60 ft.
2 channel stereo sound
CD player: CD, CD-R/RW
AM/FM radio with built- in antennas
Aux In (3.5mm audio input)
LCD display
AC power: built-in AC power cable

Includes

Remote control with CR2025 battery
User's Guide & Warranty

Power

Setup - Connecting the AC power cord
Plug the built in AC power cord into a standard wall outlet.

Battery Backup

Requires 2 AAA/1.5V batteries (not included).
Battery backup is for display and clock functions only. The unit will not play music on battery power.
Setup - Installing the Battery Backup

Orientation

Controls & Inputs

Orientation - Controls & Inputs

Connect Speakers

Orientation - Connecting Speakers
Be sure to match the positive (red) and negative (black) wires to their corresponding inputs.

Remote Control

Functions

Remote Control - Functions

Batteries

Requires 1 CR2025 battery (included).
Remote Control - Installing the Batteries

Connecting External Devices

Pairing Bluetooth and Playing Audio Wirelessly

Set the Source to BT (Bluetooth) and press the Pair/Stop button. The pairing indicator will begin quickly flashing blue. When pairing, remain within 3 feet of the unit.
Using the controls on your Bluetooth device, search for and select IHB227 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0. If need be, refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth devices.
When successfully paired and connected, a chime will sound and the pairing indicator will turn solid. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat these steps.
Use the controls on your connected Bluetooth Device to select and begin playing audio. Use the controls on the connected device or the unit and remote to play, pause or skip audio.

Aux In

(3.5mm Audio Input)
Requires 3.5 mm audio input cable (not included).

Plug a 3.5 mm audio input cable into the Aux In on the unit and the headphone jack on a smartphone or other audio source.
Set the Source to Aux and use the controls on your connected music player to select and play audio.
Audio played through the connected device should now be heard through the speakers.

CD & Radio

Loading and Playing a CD

Open the CD tray and place a CD in the tray, label side facing up, then close the CD tray.
Set the Source to CD mode.
Use the controls on the unit or the remote to begin playing the loaded disc.

Programming a CD

Press the Stop button to stop a loaded CD.
Press the Prog button on the remote ("01" will blink on the display).
Press the Skip Back/Fwd buttons to select a track.
Press the Prog button to add the selected track to the program. Repeat this process to program up to 20 tracks to play in a specified order.
Press the Stop button to cancel a program.

Playing the AM/FM Radio

AM and FM antennas are built into the unit. Adjust the position of the unit to improve AM/FM radio reception.

Set the Source to AM or FM mode.
Use the Tune −/+ buttons to tune to a desired radio frequency.

Programming Radio Station Presets

In AM or FM mode, tune to a desired frequency and press and hold the Prog/Mem button on the remote.
Press the Tune −/+ buttons to select a preset number (up to 20 stations may be set).
Press the Prog/Mem button to save the current station to that preset.
Press the Mem −/+ button to cycle through your memory presets.

Clock/Sleep Timer & Alarm

Setting the Clock

With the unit powered off, press the Clock Set/Mem button on the front of the unit, or the Clock button on the remote. The hour will begin flashing on the display.
Press the Tuning buttons on the front of the unit or the Skip Rev/Fwd buttons on the remote to set the hour.
Press the Clock Set/Mem or Clock button again. The minutes will begin flashing on the display.
Repeat Step 2 to set the minutes.
Press the Clock Set/Mem or Clock button again to finish setting the time.

Setting the Sleep Timer

With the unit powered on, press the Sleep button on the remote. The display will show the amount of time in minutes before the timer goes off.
Press the Sleep button to select the amount of time before the timer goes off: 90 minutes, 80, 70, etc.
Wait for the display to return to normal."Sleep" will be visible on the display when the timer is on.
To turn the Sleep Timer off, perform Step 2 until the display reads"OFF".

Setting the Alarm

With the unit powered off, press the Alarm button on the front of the unit or the remote. The hour will begin flashing on the display.
Press the Tuning buttons on the front of the unit or the Skip Rev/Fwd buttons on the remote to set the hour.
Press the Alarm button again. The minutes will begin flashing on the display.
Repeat Step 2 to set the minutes.
Press the Alarm button again to set the alarm type. The alarm type will begin flashing on the display.
Repeat Step 2 to set the alarm type:Radio, CD or Buzzer.
Press the Alarm button again to finish setting the alarm.

Cancelling the Alarm

After the alarm has sounded press the Alarm button to cancel it.
Press and hold the Alarm button to turn it off entirely. The alarm indicator on the display will disappear.

Safety Instructions & Warnings

Important Safety Instructions

Read these Instructions.
Keep these Instructions.
Heed all Warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Battery Warnings

Do not ingest the battery, Chemical Burn Hazard.
The remote control supplied with this product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. Iff the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside and part of the body, seek immediate medical attention.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Do not mix old and new batteries.
Completely replace all old batteries with new ones.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
Batteries should be recycled or disposed of as per state and local guidelines.
Additional Warnings and Precautions
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
Shock hazard - Do Not Open.
Caution and marking information is located at the rear or bottom of the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
Objects filled with liquids, such as vases, shall not be placed on the apparatus.
This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.
This product meets and complies with all Federal regulations.

	To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
ATTENTION
	The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
	The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
	This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.
	This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player's lid is open and the system's interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.