Sony SA-NS310 Operating Instructions Manual page 9

Side
For details on each indicator, see "Indicator information" (page 39).
D LINK indicator
Indicates the connection status of the
wired/wireless LAN.
Green: Wireless connection (page 14).
Amber: Wired connection (page 19).
Red: The following status have occurred.
– This unit cannot find the wireless
LAN access point.
– The security method/password
selected for the access point is wrong.
– An error has occurred.
Not lit: The wireless network setting
process is not finished.
E ?/1 (ON/Standby) button, indicator
Press to switch between power on and the
standby mode currently selected (page 13).
Indicates the power status of the unit
(page 13).
Green: The unit is turned on.
Amber: The unit is in the network standby
mode.
Red: The unit is in the standby mode.
F AUDIO IN button, indicator
Press to switch the audio input on or off.
Lights in green when the audio input is on.
G VOL +
Use to adjust the volume. The illumination
indicator flashes rapidly when the volume
level is set to either minimum or
maximum.
H
Use to connect the network (LAN) cable
(not supplied).
I AUDIO IN terminal
Use to connect the audio output jack of an
external component.
J DC IN terminal
Use to connect the supplied AC adaptor
(page 12).
Rated output voltage of an AC adaptor: DC
13 V, 2 A
Note
The supplied AC adaptor and AC power cord
are exclusive for this unit. Do not use an AC
adaptor not supplied with this unit.
1)
1)
Home network/AirPlay Service is selected
automatically when the AUDIO IN indicator is
off.
2)
The VOL+ button has a tactile dot. Use it as a
reference point for operations.
2)
/– buttons
(LAN) port
9 GB