Indicator Information - Sony SA-NS310 Operating Instructions Manual

• Check the remaining battery level of the
remote control.
• Operate the remote control while aiming it
at PARTY button (the remote sensor) on
the unit.
The ?/1 (ON/Standby) indicator flashes
in red
• The system is in protect mode. Disconnect
the AC cord of the unit then reconnect it
after a few seconds. Then turn the unit on.
If the symptom recurs, consult your
nearest Sony dealer

Indicator information

Indicator White (lit) White (flashing)
Illumination In Playback
mode
The unit and AC adaptor are getting
hot.
In preparation for
playback (flashes at 1 sec
intervals)
In pause mode (flashes at
0.5 sec intervals
An error has occurred
(flashes at 0.25 sec
intervals)
During VOL buttons
operation
During power-on
• This is not a malfunction.
Blue
Blue (lit)
(flashing)
In stopped During muting
Playback (flashes at
mode 1 sec
intervals)
During
transition to
Standby mode
(flashes at
0.5 sec
intervals)
NON
In Standby
mode
During
updating
Continued t
39 GB