Honda power equipment outboard motor owner's manual (116 pages)
Summary of Contents for Honda BF350A
Page 1
Troubleshooting Guide BF350A Contents - Buzzer sounds/Indicator on - If the outboard motor was submerged - Emergency gear shifting This troubleshooting guide is for reference purposes and supplements the owner’s manual that came with your outboard motor. Always refer to the Owner’s manual for clarification and more detail on the processes shown in this document.
Page 2
Buzzer sounds/Indicator on Warning System Activation Engine Oil Pressure Warning System Informs low engine oil pressure with indicator and buzzer sounds. Overheat Warning System Informs engine overheats with indicator and buzzer sounds. Engine Oil Pressure Indicator (red) +Buzzer continuously on Overheat indicator (red) +Buzzer continuously on The power reduction system decreases the engine...
Page 3
Buzzer sounds/Indicator on PGM-FI Warning System Informs PGM-FI malfunction with indicator and buzzer sounds. ACG Warning System Informs AC generator malfunction with indicator and buzzer sounds. PGM-FI Indicator (red) +Buzzer continuously on (at long intervals) ACG Indicator (red) +Buzzer continuously on (at long intervals) Water Separator Warning System Informs water contamination in the water separator...
Page 4
If the overheat warning system stays activated, stop the engine. Tilt up the outboard motor and check the water intakes for obstructions. If there are no obstructions at the water intakes, return to the closest boat landing and contact your closest authorized Honda outboard motor dealer.
Page 5
Check the battery. If the battery is OK, consult with an authorized Honda outboard motor dealer. PGM-FI warning system Consult with an authorized Honda outboard motor dealer. When the water separator buzzer sounds Check the water separator for water contamination.
Page 6
If the outboard motor was submerged A submerged outboard motor must be serviced immediately after it is recovered from the water in order to minimize corrosion. As soon as possible, take the outboard motor to a Honda outboard motor dealer for inspection and service.
Page 7
Emergency gear shifting If the gear cannot be shifted, perform shift operation manually according to the following procedures and return to your base at possible engine speed. 1. Set the shift lever or remote control lever to the neutral position. Stop the engine.
Page 8
Emergency gear shifting Insert the phillips screwdriver with the grip of the tool kit into the hole of the shift actuator. 5. Shift gear into neutral by moving the shaft. - Grasp the shaft of the inserted Phillips screwdriver close to the shift pivot. Operate in a stable posture that makes it easy to apply force.
Need help?
Do you have a question about the BF350A and is the answer not in the manual?
Questions and answers