Laser EPS-CSWLC-306 User Manual

TWS Earbuds with Wireless Charging Case
WHAT'S IN THE BOX:
• TWS Earbuds
• Charging case
• Additional ear tip pair x2
OVERVIEW
Wireless charging pad
(at the back)
CHARGING
• Fully charge the earbuds and the case before first use with the supplied cable. We recommend
using a standard 5V USB wall charger, laptop/PC or powerbank.
• Alternatively, place the back of the charging case on a compatible wireless charger.
NOTE: Ensure proper alignment for efficient charging. Misalignment may result in slower charging
or failure to charge.
• The 4 blue charging indicators on the case, from left to right, show battery level from low to high.
They flash while charging and stay static when fully charged.
• Place the earbuds in the case; the LEDs on the earbud turn red, indicating charging. The indicators
turn off when the earbuds are fully charged.
• Earbuds will sound an alert when the battery is low.
SETTING UP
1. Take the earbuds out of the case; they will power on and sync with each other. Place them in your
ears.
2. On your connecting device, go to Settings, turn on Bluetooth and search for nearby devices.
3. Select EPS-CSWLC to pair with the your device. The earbuds will confirm the connection with a
voice prompt. From now on, any audio played on your device will be transmitted through the TWS
earbuds.
NOTE:
• If EPS-CSWLC does not appear on the connecting device, retry from step 2.
• Your earbuds auto-turn off after 3 minutes of no connection. Place them in the charging case
and restart from step 1 if needed.
• The earbuds can be paired with multiple devices, but can only play music from 1 paired device
at a time.
User Manual
EPS-CSWLC-306
• USB-A to USB-C charging cable
• User manual
Indicator light
Touch-control area
Charging indicators
USB-C Charging port
(at the bottom)