Advertisement
Quick Links
PRODUCT INCLUDES: 3.5mm audio cable, Micro-USB to USB charging cable, Quick start user manual
Volume +/- Press to adjust volume
Next Previous Press and hold to select track
MULTI-FUNCTION BUTTON
Power /Pair /Play /
Pause/ Speaker Phone.
Press and hold for approx. 7
seconds to power the unit
ON and begin pairing. Press
and hold to power OFF.
INDICATOR LAMP STATUS
Power On
Charging
Charging Complete
Pairing
Pairing Complete
CHARGING THE BATTERY
Connect your AO-BT88NC to any USB charging supply using a Micro-USB cable (supplied).
AUX IN
Your AO-BT88NC will work like normal (unpowered) headphones when connected via AUX IN /
3.5mm audio jack cable (supplied). To conserve battery power, turn your headphones OFF while in
this mode. The controls on your portable device can be used to control playback.
BLUETOOTH AUDIO PLAYBACK
- Press and hold the MULTI-FUNCTION button on your AO-BT88NC (from the OFF position) for
approximately 7 seconds to power the unit ON and to enter pairing mode. The indicator lamp will
begin flashing RED and BLUE. Note: When pairing, the devices should be within 1 meter of each other.
- Using the controls on your Bluetooth device such as a Smart Phone, select the AO-BT88NC in your
Bluetooth settings. If your device requires a password enter the default password 0000 (four zeros).
Note: For further information, refer to the user manual for your specific Bluetooth device for
instructions on pairing and connecting with Bluetooth devices.
QUICK USER MANUAL
LEFT EARCUP CONTROLS
Indicator Lamp
Aux In
STATUS
Microphone
Micro-USB
Charging Port
INDICATOR
Blue. Slow Double flash.
Red. On.
Red. Off.
Blue and Red. Flashing.
Blue. Slow Flash.
AO-BT88NC
RIGHT EARCUP CONTROLS
Noise Cancelling
Noise Cancelling
Indicator Light
ON/OFF
Advertisement
Related Manuals for Laser AO-BT88NC
Summary of Contents for Laser AO-BT88NC
- Page 1 RED and BLUE. Note: When pairing, the devices should be within 1 meter of each other. - Using the controls on your Bluetooth device such as a Smart Phone, select the AO-BT88NC in your Bluetooth settings. If your device requires a password enter the default password 0000 (four zeros).
- Page 2 - When successfully paired, the INDICATOR LAMP will slowly flash blue and an audible tone will sound through the headphones. - Use the controls on either your smart phone or your AO-BT88NC for playback. USING THE SPEAKERPHONE (While connected via Bluetooth) - When a call is received, a ringtone will sound through your AO-BT88NC.
- Page 3 Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified, your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the Laser Product and the type of defect.