Page 1
User Manual Glow in the Dark TWS Earbuds EPS-KTWSGO...
Page 2
Thank you for your purchase! Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use. For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and...
LED INDICATOR Flashing = Case charging. Solid = Case fully charged. Solid = Earbuds charging. Green LED Off = Earbuds fully charged. GLOW IN THE DARK • The case and earbuds can glow in the dark when placed under a light source (such as a lamp) for 5 - 10 minutes.
Page 7
• Open the Bluetooth settings on your device (e.g. smartphone) then search for and select EPS-KTWSGO from the list. • If the earbuds don’t show up, refresh the Bluetooth list, or wait approx. 1-2 minutes.
Page 8
DISCONNECTING • To remove the earbuds, go to the Bluetooth settings on your device, tap the earbuds and select “Remove” or “Forget”. • To remove the earbuds from a device you no longer have or can’t access, simply make sure you are at least 50 meters away from the old device then pair the earbuds to a new device.
Page 9
RE-SYNCING THE EARBUDS • If the 2 earbuds are not synced together or enter a disconnected state during use please put both earbuds back into the case, close the case lid and leave for 1 minute. • The earbuds should now be re-synced to each other.
Page 10
EARBUDS TOUCH CONTROLS • Previous Track Triple tap left earbuds. • Next Track Triple tap right earbuds. • Play/Pause Double tap either earbuds. • Answer Call Double tap either earbuds during incoming call. • End Call Double tap either earbuds during call. Press and hold either •...
Page 11
CHARGING Case: • Plug the included USB cable into a 5V/1A charging source. • The case will take 2 hours to charge fully. Earbuds: • Place the earbuds into the case. • Make sure the case has sufficient battery to recharge the earbuds. •...
TROUBLESHOOTING Why is sound only coming out of one earbud? • Make sure both earbuds have been charged and are synced together. • Follow the instructions outlined in this manual to re-sync your earbuds.
Page 13
• Wait approx. 1-2 minutes for your device’s Bluetooth list to update then search for and select EPS-KTWSGO. • Make sure the earbuds have not already been paired to another device. Follow the disconnecting instructions outlined in this...
Page 14
TROUBLESHOOTING Continued... Why is the sound skipping, pausing, or stuttering when playing audio? • The maximum wireless range from the earbuds to the connected device is 10 meters. If close to or exceeding this distance the sound signal may be affected. •...
Page 15
Visit our website www.laserco.com.au Check us out at www.youtube.com/lasercoau...