Laser EPS-SPDIB-320 User Manual

TWS Earbuds with Mini Ear-Hook
WHAT'S IN THE BOX:
• TWS earbuds
• Charging case
• Additional ear tip pair x2
OVERVIEW
USB-C Charging port
(at the back of the case)
Indicator light
CHARGING
• Fully charge the earbuds and the case before first use with the supplied cable. We recommend
using a standard 5V USB wall charger, laptop/PC or powerbank.
• When the case is being charged, the display will show the current battery capacity level.
• Place the earbuds in the case; the indicator on the earbuds turn red, indicating charging. They
turn off when fully charged.
• Press and hold the Charging control button to stop charging, and press it again to resume.
• Earbuds will sound an alert when the battery is low.
SETTING UP
1. Take the earbuds out of the case; they will power on and sync with each other. Place them in your
ears.
2. On your connecting device, go to Settings, turn on Bluetooth and search for nearby devices.
3. Select EPS-SPDIB to pair with the your device. The earbuds will confirm the connection with a
voice prompt. From now on, any audio played on your device will be transmitted through the TWS
earbuds.
NOTE:
• If EPS-SPDIB does not appear on the connecting device, retry from step 2.
• Your earbuds auto-turn off after 3 minutes of no connection. Place them in the charging case
and restart from step 1 if needed.
• The earbuds can be paired with multiple devices, but can only play music from 1 paired device
at a time.
User Manual
EPS-SPDIB-320
• USB-C to USB-C charging cable
• User manual
Control button*
Charging control button
Charging indicator
*The controls are
not touch-sensitive;
instead, physically
press the buttons,
which are not visibly
apparent.