Setting Up The Audio Options - Samsung DVD-P182N Manual

Setting Up the Audio
Options
Audio Options allows you to setup the audio device
and sound status settings depending on the audio
system in use.
1. With the unit in Stop mode, press the MENU button.
2. Press the œ œ /ƒ ƒ buttons to select Setup, then press the ‹
or ENTER button.
3. Press the œ œ /ƒ ƒ buttons to select Audio Setup, then press
the ‹ or ENTER button.
4. Press the œ œ /ƒ ƒ buttons to select the desired item, then
press the ‹ or ENTER button.
❶ Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via the digital output.
Select Bitstream when connecting to a Dolby Digital
Decoder..
❷ MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CHor 8CH). Select Bitstream when using the Digital
Audio Output.
❸ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all signals will
be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled
audio through the digital outputs.
• To make the Setup menu disappear, press the
MENU button.
‹ ‹
Language Setup
‹ ‹
Audio Setup
‹ ‹
Display Setup
‹ ‹
Parental Setup :
Enter Return Menu
AUDIO SETUP
Dolby Digital Out :PCM
MPEG-2 Digital Out :PCM
Dynamic Compression :On
PCM Down Sampling :On
Output channel :5.1CH
‹ ‹
Speaker Setup
Enter Return Menu
❺ Output Channel
- 2 Ch : Select this when using 2 channel connecetion
only
- 5.1Ch: Select this when using 5.1 channel connection.
Surround Sound Speaker Setup
1. With the unit in Stop mode, press the MENU button.
2. Press the œ œ /ƒ ƒ buttons to select Setup, then press the ‹
or ENTER button.
3. Press the œ œ /ƒ ƒ buttons to select Audio Setup, then press
the ‹ or ENTER button.
4. Press the œ œ /ƒ ƒ buttons to select Speaker Setup, then
press the ‹ or ENTER button.
5. Press the œ œ /ƒ/¦/‹ buttons to select the desired item,
then press the ENTER button to set the speaker.
Note
To make speaker setup menu appear, Select output
channel to 5.1Ch.
Note
To make the setup menu disappear, press the MENU
button.
The default settings : FRONT L, R (Small),
CENTER (Small), SURROUND (Small).
Select the size of the speakers to be connected.
❶ Front (FL, FR)
- Large: Normally select this.
- Small: When the sound distorts or the suround
sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirec
tion circuitry and outputs the bass frequencies
of the speaker from the subwoofer
AUDIO SETUP
Dolby Digital Out : PCM
MPEG-2 Digital Out : PCM
Dynamic Compression : On
PCM Down Sampling : On
Output Channel : 5.1Ch
‹ ‹
Speaker Setup
Enter Return Menu
SPEAKER SETUP
Small
Small
Small
On
Small
Test
User
Small
Enter Return Menu
25