Table of Contents
Advertisement
Maintenance
Cleaning the Cabinet
Clean the cabinet, and controls with a soft cloth
slightly moistened with a mild detergent
solution.
Do not use any type of abrasive pad, scouring
powder or solvent such as alcohol or benzine.
Cleaning the Head
Prolonged operation may cause contamination
of the head. To make the best possible
recording and playback, we recommend you to
clean the head every ten hours of recording/
playback, using the cleaning cassette
DT-10CLA (not supplied).
Likewise when the unit has not been used for a
long period of time, clean the head with the
cleaning cassette before use. If the head is left
dirty, it may cause sound dropouts during
playback.
How to use the cleaning cassette
1 Insert the cleaning cassette as you would a
normal DAT cassette.
2 Press the » PLAY button, then press the W
STOP button after about 10 seconds.
3 Remove the cleaning cassette without
rewinding it.
4 Proceed with recording and playback with a
normal DAT cassette and check the sound
quality.
Notes on the cleaning cassette
«The cleaning cassette cannot be used tor
recording or playback.
+ Do not clean the head with the cleaning
cassette more than five times in succession.
Cleaning the head continuousty for a long
period of time may cause wear to the head.
+ Do not rewind the cleaning cassette each time
you use it. When the cleaning cassette tape is
taken up (wound) completely, rewind it to the
beginning and reuse it. The cleaning cassette
can be used approximately 200 times, with
10 seconds of cleaning each time.
Advertisement
Table of Contents
