Maintenance; Drum Clean - Samsung WW1 CG Series User Manual

Maintenance

Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.

DRUM CLEAN+

Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water
between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber door gasket.
1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select DRUM CLEAN+.
3. Press and hold Start/Pause.
NOTE
• The water temperature for DRUM CLEAN+ is set to 70 °C, which cannot be changed.
• It is recommended to run the DRUM CLEAN+ cycle once every 40 washes.
• To prevent limescale, add the proper amount of detergent according to your local water hardness or add
a water softener additive together with the detergent.
DRUM CLEAN+ reminder
Depending on the model, the DRUM CLEAN+ reminder is either an icon or an LED.
For icons, the icon lights up on the control panel.
For LEDs, the LED lights up next to DRUM CLEAN+, or on the option area of the control panel.
• The DRUM CLEAN+ reminder blinks on the control panel once every 40 washes. It is advisable to
perform DRUM CLEAN+ regularly.
• When you first see this reminder blinking, you can ignore the reminder for 6 consecutive washes. From
the 7 wash, the reminder no longer appears. However, it appears again on the second 40
th
• Even after the last process is terminated, the "0" message may remain.
• Even if "0" does not disappear, the machine operates normally.
• It is recommended to run the cycle regularly for hygienic purposes.
Untitled-2 45
wash.
th
English 45
2023-12-27( ) 4:42:16