Subscribe to Our Youtube Channel
Related Manuals for Afore AF5000W-LE
Summary of Contents for Afore AF5000W-LE
- Page 1 Low Voltage Stackable Energy Storage Battery Installation and Operation Manual +86-21-54326236 +86-21-54326136 info@aforenergy.com Building 7, No.333 Wanfang Rd, Minhang District, Shanghai, China. 201112...
-
Page 2: Table Of Contents
AF5000W-LE Operation Manual This Manual introduces AF5000W-LE. AF5000W-LE is a Low-voltage Lithium-iron Phosphate Battery energy storage system. Please read this manual before you install the battery and follow the instruction carefully during the installation process. Catalogue 1 Technical Specification..........................1-2 2 Safety Information General Safety .......................... -
Page 3: Technical Specification
Battery Cover Battery Module Dimensions Battery Base Battery Cover Battery Cell Capacity Configuration dimensions dimensions (W*D*H) Weight Weight (W*D*H) (W*D*H) AF5000W-LE 600*210*300(mm) 100Ah 1P16S 600*210*90 (mm) 600*210*50 (mm) 23.62*8.27*11.81 (inch) 5kg (11.02Ib) 2.5kg (5.51Ib) 23.62*8.27*3.54 (inch) 23.62*8.27*1.97 (inch) AF5000W-LE Battery Module... -
Page 4: Safety Information
2. Safety Information Keep the batteries away from children and pets. 2 . 1 General Safety Do not touch the energized battery, the temperature of the battery enclosure may increase during operation. Please read the user manual carefully and check all the safety instructions Do not touch the energized battery terminals. -
Page 5: Electrical Safety
Electrical Safety Environment Safety Before installation, ensure that the equipment is intact. Otherwise, electric Ensure the battery is installed in a dry and well-ventilated location. shock or fire may occur. The installation position must be away from direct sunlight and rain. Do not connect or disconnect power cables when battery is power-on. -
Page 6: System Information
3 . 3 . 1 Connection Area 3 . 1 Product Introduction ON/OFF Link in AF5000W-LE is a low-voltage battery storage system based on lithium-iron phosphate technology. It is used to primarily store excess power that is generated by an inverter base d on PV system. -
Page 7: Link Power/Link In/Link Out
3 . 3 . 5 LED Indicator Definition 3 . 3 . 3 Link Communication Port The Link Communication Port is the interface between the battery packs and the inverter. The inverter retrieves the battery data such as SOC, DOD, flash 1 - 0.25s on/3.75s off charge current via this connection. -
Page 8: Tools
4. Installation 4 . 2 Checking deliverables After unpacking the battery, check whether deliverables are intact and complete. 4 . 1 Tools Packing list of Battery Box Tools Part name/size Quantity Picture Used for Star screwdriver Hammer drill 10 mm Rubber mallet Installation Battery box... - Page 9 Used for System box packing list Flat locating pin positioning multiple packs Part name/size Quantity Picture Used for Used for the Grounding cable grounding To fix the battery Support frame on the wall Battery negative p Negtive charging cable ower To put at the The base bottom of the...
- Page 10 4 . 3 Installation Step 2 Screw the locating pin into the base and put the first battery pack on the base. Step 1 （2.1） （2.2） Place the base against the wall, the distance between the base and the wall is 30mm as followed.
- Page 11 Step 3 Step 5 Secure the battery module to the base with the L-shape plate. Attached the L-shape support frame onto the battery as shown in the image. （3.1） （3.2） Step 4 （5.1） （5.2） Place the next battery module on top of the first battery module and secure the Step 6 battery modules with the fixing plate.
- Page 12 Step 8 Step 7 Connect the small fixing plate between each modules as follows. Secure the top of the battery with the provided screws. （7.1） （7.2）...
- Page 13 Step 9 Connect the power through P+ and P- . Connect the first battery pack COM Terminal to the inverter BMS port Connect the power cables between the battery and the battery as shown. for communication beween inverter and battery. Link in ON/OFF Link out...
-
Page 14: Commissioning Procedure
6. Maintenance Recharge Requirements During Normal Storage Battery should be stored in an environment with temperature range between -10°C ~ +45°C and maintained regularly according to following table with 0.5C(50A) current till 50% SOC after long storage time. Storage Relative Humidity of Storage Time Environment Storage Environment...
Need help?
Do you have a question about the AF5000W-LE and is the answer not in the manual?
Questions and answers